EST

[Steve Knickerbocker 512-356-3000 X6759]

--Boundary (ID UxJ6DWxGkEYSwE3PgHgQjw)
Content-type: TEXT/PLAIN; CHARSET=US-ASCII



--Boundary (ID UxJ6DWxGkEYSwE3PgHgQjw)
Content-type: MESSAGE/RFC822

Date: Mon, 11 Dec 1995 07:21:00 CST
From: "Steve Knickerbocker"@MR.SEMATECH.Org
Subject: Re: EST
MIME-version: 1.0
Content-type: TEXT/PLAIN; CHARSET=US-ASCII
Posting-date: Mon, 11 Dec 1995 00:00:00 CST
A1-type: DOCUMENT

At 08:40 PM 12/8/95 -0500, you wrote:
>One problem with this setup, when the fifth magnetic pickup  is triggered, is
>it at TDC compression/power or is it TDC exhaust/intake.  This is where you
>need a magnetic pickup  on the cam.
>
>See ya,
>
>
>Mike

No cam pickup is needed for dual coils or batch fired injectors, only one
coil per cylinder, or sequential injector systems.

-j-

I've come to this conclusion this past weekend.  What I need to know is the
formula for convering mS to degrees at a given RPM.

Steve

--Boundary (ID UxJ6DWxGkEYSwE3PgHgQjw)--