MAF and SD (was re: Re: New member intro)

[Lou Faustini]

>With regard to speed-density vs. mass air flow, has anyone considered the 
>robustness (not in a control sense) of the two systems to errors such as 
>air leaks and sources of inflow downstream of the throttlebody?  Is a 
>speed-density system more resistant to or accepting of such disturbances?
>
>Tony
>
   Tony:

    I know this... If you are going to put in an aftermarket cam in an EFI 
engine, you are much more likely to like the results if its a MAF type 
setup. I think thats because the MAF is less sensitive to the vaccum loss 
associated with a "big cam" motor..

                            ----- Lou Faustini