[EFI68k] new release and group survey

John S Gwynne jsg
Wed Jan 25 20:42:02 GMT 1995


--------

   In message <9501251526.AA05609 at ivan.gallium.com> , you write:
 
| Can you post
| the preliminary specs for the EFI card? Will it have sufficient I/O to so
| SEFI and distributorless ignition?

yes, by virtue of the 67F687 it will support both.

features list from the 67f687 data sheet:
* 2 or 4 cycle engines
* parallel microprocessor bus control
* configurable for a variety of sensor patterns
* variable reluctance or Hall Effect sensor inputs
* engine position angle counter to 10,000 RPM
* 4 ignition outputs (8 individual spark advance values)
* 8 injection outputs
* dwell timer
* ignition coil current limit (for use with external power transistors)
* injector driver short circuit protection
* diagnostics
* 8 programmable I/O lines
* PWM outputs
* edge detect inputs
* on chip oscillator
* +5V operation
* CMOS
* operating temperature range -40 to +125 C
* 68-pin PLCC


                                       John S Gwynne
                                          Gwynne.1 at osu.edu
_______________________________________________________________________________
               T h e   O h i o - S t a t e   U n i v e r s i t y
    ElectroScience Laboratory, 1320 Kinnear Road, Columbus, Ohio 43212, USA
                Telephone: (614) 292-7981 * Fax: (614) 292-7292
-------------------------------------------------------------------------------



More information about the Diy_efi mailing list