EFI68k board

[John S Gwynne]

My goal has been to make a *minimal* board that fully 
supports RTEMS/C/C++. I have been using version 1.00 now for
about 3 weeks and the C/C++ environment is good. 
If anyone has any suggestions, I would like to hear them.

| (I am getting about 20uA for 768k and an RTC on another job. A
| button cell will last for around a year.)

the Dallas NVRAM's were guaranteed for five years and were
predicted to last for ten. I still have one going that's 
8 years old.

Has anyone tried any of the vanadium pentoxide lithium
rechargeable batteries? (I don't have temperature data for
them either)

My calculations show a 3F cap will only last about 2 days. 

                                       John S Gwynne
                                          Gwynne.1 at osu.edu
_______________________________________________________________________________
               T h e   O h i o - S t a t e   U n i v e r s i t y
    ElectroScience Laboratory, 1320 Kinnear Road, Columbus, Ohio 43212, USA
                Telephone: (614) 292-7981 * Fax: (614) 292-7292
-------------------------------------------------------------------------------