Message Router delivery notification message

[MRGATE%WOODS.dnet at woods.uml.edu]

RE  Message ID: 74922172105991/866824 at WOODS
UA  content ID: Re: [EFI68k] new release and group survey

Attempted delivery to:

    Route                 : @AM		<--
    Userid                : VAHEG
    Arrival date          : 28-JAN-1995 12:30

This delivery failed. Failure reason was "transfer failure".
Diagnostic was "max time expired".

Message-id: 74922172105991/866824 at WOODS
From:	MX%"DIY_EFI at coulomb.eng.ohio-state.edu"@MRGATE at WOODS
Subject: Re: [EFI68k] new release and group survey
Precedence: 1
To:	VAHEG at AM

Return-Path: <owner-diy_efi at coulomb.eng.ohio-state.edu>
Received: from coulomb.eng.ohio-state.edu by aspen.uml.edu (MX V4.1 VAX) with
          SMTP; Fri, 27 Jan 1995 12:29:44 EST
Received: by coulomb.eng.ohio-state.edu (920330.SGI/920502.SGI) for
          VAHEG at aspen.UML.EDU id AA00679; Fri, 27 Jan 95 15:59:49 GMT
Received: from uunet.ca by coulomb.eng.ohio-state.edu via SMTP
          (920330.SGI/920502.SGI) for /usr/local/mail/majordomo-1.92/wrapper
          resend -p bulk -M 10000        -l Diy_Efi -f Diy_Efi-Owner -h
          coulomb.eng.ohio-state.edu -s        -r DIY_EFI diy_efi-outgoing id
          AA00674; Fri, 27 Jan 95 10:59:46 -0500
Received: from gateway.prior.com ([142.77.252.4]) by mail.uunet.ca with SMTP id
          <86683-4>; Fri, 27 Jan 1995 10:59:59 -0500
Received: by gateway.prior.com (4.1/SMI-4.1) id AA25705; Fri, 27 Jan 95
          10:42:30 EST
Received: from odin.gallium.com(192.139.238.33) by gateway.gallium.com via smap
          (V1.3) id sma025703; Fri Jan 27 10:42:06 1995
Received: from ivan.gallium.com by odin (4.1/SMI-4.1) id AA09885; Fri, 27 Jan
          95 10:35:08 EST
Received: by ivan.gallium.com (931110.SGI/930416.SGI) for
          @odin.gallium.com:DIY_EFI at coulomb.eng.ohio-state.edu id AA26327; Fri,
          27 Jan 95 10:46:20 -0500
Date: Fri, 27 Jan 1995 10:46:20 -0500
From: MSargent at gallium.com (Michael F. Sargent)
Message-ID: <9501271546.AA26327 at ivan.gallium.com>
To: DIY_EFI at coulomb.eng.ohio-state.edu
Subject: Re: [EFI68k] new release and group survey
Sender: owner-diy_efi at coulomb.eng.ohio-state.edu
Precedence: bulk
Reply-To: DIY_EFI at coulomb.eng.ohio-state.edu

John- Two more points came to mind this morning:

1) Will the MAX791 and KM681000L allow the contents of the SRAM to be retained
   over power off? How much current will be drawn to keep the SRAM contents
   alive? (Mine would go in a boat, and drain may be a problem if the boat
   isn't run for week or two.)

2) Downloading 256KB or code at 9600 baud will take two minutes. Is there any
   way to speed this up? (i.e. much higher baud rate, or parallel interface)

Thanks,
       Mike
+--------------------------------------------------------------------------+
| Michael F. Sargent   | Net: msargent at gallium.com | Phone: 1(613)721-0902 |
| Gallium Software Inc.|                           | FAX:   1(613)721-1278 |
+--------------------------------------------------------------------------+