Mail for:- n.mulvana at e-eng.hull.ac.uk

postmaster at hull.ac.uk postmaster at hull.ac.uk
Sat Oct 7 05:16:53 GMT 1995


Hi,
 This message has been generated in response to your message below.
The central mail system is unable to deliver your message
as there are a number of people with the same initials and surnames.
Please select the appropriate e-mail address from the list shown below 
and try again:-


Any questions or problems, please call or email
    Alex Sharaz
    Voice +44 1482 465700
Janet:A.Sharaz at uk.ac.hull.ucc
Internet:A.Sharaz at ucc.hull.ac.uk

----
===============================
/usr/local/bin/osimail: Command not found
===============================
Your Message:-
Received: from coulomb.eng.ohio-state.edu by chopin with SMTP internet(PP);
          Sat, 7 Oct 1995 06:07:51 +0100
Received: by coulomb.eng.ohio-state.edu (940816.SGI.8.6.9/940406.SGI)	for diy_efi-outgoing 
          id EAA04446; Sat, 7 Oct 1995 04:08:50 GMT
Received: from chopin.ucc.hull.ac.uk by coulomb.eng.ohio-state.edu 
          via ESMTP (940816.SGI.8.6.9/940406.SGI)	for <DIY_EFI at coulomb.eng.ohio-state.edu> 
          id AAA04432; Sat, 7 Oct 1995 00:08:45 -0400
From: postmaster at hull.ac.uk
Message-Id: <199510070408.AAA04432 at coulomb.eng.ohio-state.edu>
Received: from hull.ac.uk by mailhub1.hull.ac.uk           
          id <18103-0 at mailhub1.hull.ac.uk>; Sat, 7 Oct 1995 05:01:50 +0100
Date:     Sat, 7 Oct 1995 05:01:44 +0100
To: DIY_EFI at coulomb.eng.ohio-state.edu
Subject:  Mail for:- n.mulvana at e-eng.hull.ac.uk 
Sender: owner-diy_efi at coulomb.eng.ohio-state.edu
Precedence: bulk
Reply-To: DIY_EFI at coulomb.eng.ohio-state.edu

Hi,
 This message has been generated in response to your message below.
The central mail system is unable to deliver your message
as there are a number of people with the same initials and surnames.
Please select the appropriate e-mail address from the list shown below 
and try again:-


Any questions or problems, please call or email
    Alex Sharaz
    Voice +44 1482 465700
Janet:A.Sharaz at uk.ac.hull.ucc
Internet:A.Sharaz at ucc.hull.ac.uk

----
===============================
/usr/local/bin/osimail: Command not found
===============================
Your Message:-
Received: from coulomb.eng.ohio-state.edu by chopin with SMTP internet(PP);
          Sat, 7 Oct 1995 05:01:11 +0100
Received: by coulomb.eng.ohio-state.edu (940816.SGI.8.6.9/940406.SGI)	for diy_efi-outgoing 
          id DAA04193; Sat, 7 Oct 1995 03:24:37 GMT
Received: from spsgate.sps.mot.com by coulomb.eng.ohio-state.edu 
          via SMTP (940816.SGI.8.6.9/940406.SGI)	for <DIY_EFI at coulomb.eng.ohio-state.edu> 
          id XAA04179; Fri, 6 Oct 1995 23:24:34 -0400
Received: from mogate (mogate.sps.mot.com) 
          by spsgate.sps.mot.com (4.1/SMI-4.1/Email 2.1 10/25/93)	id AA04728 
          for DIY_EFI at coulomb.eng.ohio-state.edu; Fri, 6 Oct 95 20:24:16 MST
Received: from txbc.sps.mot.com ([192.88.171.200]) 
          by mogate (4.1/SMI-4.1/Email-2.0)	id AA00706;
          Fri, 6 Oct 95 20:24:15 MST
Received: from roadster.sps.mot.com by txbc.sps.mot.com 
          with SMTP	(1.38.193.4/16.2) id AA05683; Fri, 6 Oct 95 22:24:14 -0500
Received: by roadster.autotest (4.1/SMI-4.1)	id AA26349;
          Fri, 6 Oct 95 22:20:21 CDT
Date: Fri, 6 Oct 95 22:20:21 CDT
From: walter at roadster.sps.mot.com (thomas walter x5955)
Message-Id: <9510070320.AA26349 at roadster.autotest>
To: DIY_EFI at coulomb.eng.ohio-state.edu
Subject: Re:  Haltech throttle bodies and Re: Fuel injection questions
Sender: owner-diy_efi at coulomb.eng.ohio-state.edu
Precedence: bulk
Reply-To: DIY_EFI at coulomb.eng.ohio-state.edu

Solution to the reversion problem dealt with the intake manifold. The
revised manifold was slightly different. Seems the port - intake manifold
- injector location was at some critical point at the desired rpm.

Wave theory is just one of those things I would not think about, but
came into play on that design (remember it was a race engine, with
a radical cam... ). No, I did not have anything to do with the solution. 

Perhaps one of those "why didn't I think of that" was the elimination
of the air pumps and the additions of reed relays to the air cleaner
housing. First time I saw that (under the hood of a Datsun), it really
took along time to figure out what they had done. Despite having built
and played with two stroke motorcycles, it was not exactly clear WHY
it worked. Once it dawned on me, it seemed almost too simple of a
solution. ;-)

--Tom



More information about the Diy_efi mailing list