Mail for:- n.mulvana at e-eng.hull.ac.uk
postmaster at hull.ac.uk
postmaster at hull.ac.uk
Sat Oct 7 08:10:44 GMT 1995
Hi,
This message has been generated in response to your message below.
The central mail system is unable to deliver your message
as there are a number of people with the same initials and surnames.
Please select the appropriate e-mail address from the list shown below
and try again:-
Any questions or problems, please call or email
Alex Sharaz
Voice +44 1482 465700
Janet:A.Sharaz at uk.ac.hull.ucc
Internet:A.Sharaz at ucc.hull.ac.uk
----
===============================
/usr/local/bin/osimail: Command not found
===============================
Your Message:-
Received: from coulomb.eng.ohio-state.edu by chopin with SMTP internet(PP);
Sat, 7 Oct 1995 09:01:46 +0100
Received: by coulomb.eng.ohio-state.edu (940816.SGI.8.6.9/940406.SGI) for diy_efi-outgoing
id HAA05503; Sat, 7 Oct 1995 07:08:34 GMT
Received: from chopin.ucc.hull.ac.uk by coulomb.eng.ohio-state.edu
via ESMTP (940816.SGI.8.6.9/940406.SGI) for <DIY_EFI at coulomb.eng.ohio-state.edu>
id DAA05489; Sat, 7 Oct 1995 03:08:30 -0400
From: postmaster at hull.ac.uk
Message-Id: <199510070708.DAA05489 at coulomb.eng.ohio-state.edu>
Received: from hull.ac.uk by mailhub1.hull.ac.uk
id <21764-0 at mailhub1.hull.ac.uk>; Sat, 7 Oct 1995 08:02:34 +0100
Date: Sat, 7 Oct 1995 08:02:32 +0100
To: DIY_EFI at coulomb.eng.ohio-state.edu
Subject: Mail for:- n.mulvana at e-eng.hull.ac.uk
Sender: owner-diy_efi at coulomb.eng.ohio-state.edu
Precedence: bulk
Reply-To: DIY_EFI at coulomb.eng.ohio-state.edu
Hi,
This message has been generated in response to your message below.
The central mail system is unable to deliver your message
as there are a number of people with the same initials and surnames.
Please select the appropriate e-mail address from the list shown below
and try again:-
Any questions or problems, please call or email
Alex Sharaz
Voice +44 1482 465700
Janet:A.Sharaz at uk.ac.hull.ucc
Internet:A.Sharaz at ucc.hull.ac.uk
----
===============================
/usr/local/bin/osimail: Command not found
===============================
Your Message:-
Received: from coulomb.eng.ohio-state.edu by chopin with SMTP internet(PP);
Sat, 7 Oct 1995 08:02:21 +0100
Received: by coulomb.eng.ohio-state.edu (940816.SGI.8.6.9/940406.SGI) for diy_efi-outgoing
id GAA05154; Sat, 7 Oct 1995 06:13:53 GMT
Received: from chopin.ucc.hull.ac.uk by coulomb.eng.ohio-state.edu
via ESMTP (940816.SGI.8.6.9/940406.SGI) for <DIY_EFI at coulomb.eng.ohio-state.edu>
id CAA05140; Sat, 7 Oct 1995 02:13:48 -0400
From: postmaster at hull.ac.uk
Message-Id: <199510070613.CAA05140 at coulomb.eng.ohio-state.edu>
Received: from hull.ac.uk by mailhub1.hull.ac.uk
id <20639-0 at mailhub1.hull.ac.uk>; Sat, 7 Oct 1995 07:07:29 +0100
Date: Sat, 7 Oct 1995 07:07:28 +0100
To: DIY_EFI at coulomb.eng.ohio-state.edu
Subject: Mail for:- n.mulvana at e-eng.hull.ac.uk
Sender: owner-diy_efi at coulomb.eng.ohio-state.edu
Precedence: bulk
Reply-To: DIY_EFI at coulomb.eng.ohio-state.edu
Hi,
This message has been generated in response to your message below.
The central mail system is unable to deliver your message
as there are a number of people with the same initials and surnames.
Please select the appropriate e-mail address from the list shown below
and try again:-
Any questions or problems, please call or email
Alex Sharaz
Voice +44 1482 465700
Janet:A.Sharaz at uk.ac.hull.ucc
Internet:A.Sharaz at ucc.hull.ac.uk
----
===============================
/usr/local/bin/osimail: Command not found
===============================
Your Message:-
Received: from coulomb.eng.ohio-state.edu by chopin with SMTP internet(PP);
Sat, 7 Oct 1995 07:06:56 +0100
Received: by coulomb.eng.ohio-state.edu (940816.SGI.8.6.9/940406.SGI) for diy_efi-outgoing
id FAA04765; Sat, 7 Oct 1995 05:04:37 GMT
Received: from chopin.ucc.hull.ac.uk by coulomb.eng.ohio-state.edu
via ESMTP (940816.SGI.8.6.9/940406.SGI) for <DIY_EFI at coulomb.eng.ohio-state.edu>
id BAA04751; Sat, 7 Oct 1995 01:04:28 -0400
From: postmaster at hull.ac.uk
Message-Id: <199510070504.BAA04751 at coulomb.eng.ohio-state.edu>
Received: from hull.ac.uk by mailhub1.hull.ac.uk
id <18940-0 at mailhub1.hull.ac.uk>; Sat, 7 Oct 1995 05:58:24 +0100
Date: Sat, 7 Oct 1995 05:58:21 +0100
To: DIY_EFI at coulomb.eng.ohio-state.edu
Subject: Mail for:- n.mulvana at e-eng.hull.ac.uk
Sender: owner-diy_efi at coulomb.eng.ohio-state.edu
Precedence: bulk
Reply-To: DIY_EFI at coulomb.eng.ohio-state.edu
Hi,
This message has been generated in response to your message below.
The central mail system is unable to deliver your message
as there are a number of people with the same initials and surnames.
Please select the appropriate e-mail address from the list shown below
and try again:-
Any questions or problems, please call or email
Alex Sharaz
Voice +44 1482 465700
Janet:A.Sharaz at uk.ac.hull.ucc
Internet:A.Sharaz at ucc.hull.ac.uk
----
===============================
/usr/local/bin/osimail: Command not found
===============================
Your Message:-
Received: from coulomb.eng.ohio-state.edu by chopin with SMTP internet(PP);
Sat, 7 Oct 1995 05:57:55 +0100
Received: by coulomb.eng.ohio-state.edu (940816.SGI.8.6.9/940406.SGI) for diy_efi-outgoing
id EAA04424; Sat, 7 Oct 1995 04:07:47 GMT
Received: from chopin.ucc.hull.ac.uk by coulomb.eng.ohio-state.edu
via ESMTP (940816.SGI.8.6.9/940406.SGI) for <DIY_EFI at coulomb.eng.ohio-state.edu>
id AAA04410; Sat, 7 Oct 1995 00:07:42 -0400
From: postmaster at hull.ac.uk
Message-Id: <199510070407.AAA04410 at coulomb.eng.ohio-state.edu>
Received: from hull.ac.uk by mailhub1.hull.ac.uk
id <18070-0 at mailhub1.hull.ac.uk>; Sat, 7 Oct 1995 05:01:35 +0100
Date: Sat, 7 Oct 1995 05:01:29 +0100
To: DIY_EFI at coulomb.eng.ohio-state.edu
Subject: Mail for:- n.mulvana at e-eng.hull.ac.uk
Sender: owner-diy_efi at coulomb.eng.ohio-state.edu
Precedence: bulk
Reply-To: DIY_EFI at coulomb.eng.ohio-state.edu
Hi,
This message has been generated in response to your message below.
The central mail system is unable to deliver your message
as there are a number of people with the same initials and surnames.
Please select the appropriate e-mail address from the list shown below
and try again:-
Any questions or problems, please call or email
Alex Sharaz
Voice +44 1482 465700
Janet:A.Sharaz at uk.ac.hull.ucc
Internet:A.Sharaz at ucc.hull.ac.uk
----
===============================
/usr/local/bin/osimail: Command not found
===============================
Your Message:-
Received: from coulomb.eng.ohio-state.edu by chopin with SMTP internet(PP);
Sat, 7 Oct 1995 05:00:42 +0100
Received: by coulomb.eng.ohio-state.edu (940816.SGI.8.6.9/940406.SGI) for diy_efi-outgoing
id DAA04099; Sat, 7 Oct 1995 03:08:48 GMT
Received: from chopin.ucc.hull.ac.uk by coulomb.eng.ohio-state.edu
via ESMTP (940816.SGI.8.6.9/940406.SGI) for <DIY_EFI at coulomb.eng.ohio-state.edu>
id XAA04085; Fri, 6 Oct 1995 23:08:42 -0400
From: postmaster at hull.ac.uk
Message-Id: <199510070308.XAA04085 at coulomb.eng.ohio-state.edu>
Received: from hull.ac.uk by mailhub1.hull.ac.uk
id <16617-0 at mailhub1.hull.ac.uk>; Sat, 7 Oct 1995 03:59:58 +0100
Date: Sat, 7 Oct 1995 03:59:57 +0100
To: DIY_EFI at coulomb.eng.ohio-state.edu
Subject: Mail for:- n.mulvana at e-eng.hull.ac.uk
Sender: owner-diy_efi at coulomb.eng.ohio-state.edu
Precedence: bulk
Reply-To: DIY_EFI at coulomb.eng.ohio-state.edu
Hi,
This message has been generated in response to your message below.
The central mail system is unable to deliver your message
as there are a number of people with the same initials and surnames.
Please select the appropriate e-mail address from the list shown below
and try again:-
Any questions or problems, please call or email
Alex Sharaz
Voice +44 1482 465700
Janet:A.Sharaz at uk.ac.hull.ucc
Internet:A.Sharaz at ucc.hull.ac.uk
----
===============================
/usr/local/bin/osimail: Command not found
===============================
Your Message:-
Received: from coulomb.eng.ohio-state.edu by chopin with SMTP internet(PP);
Sat, 7 Oct 1995 03:59:43 +0100
Received: by coulomb.eng.ohio-state.edu (940816.SGI.8.6.9/940406.SGI) for diy_efi-outgoing
id CAA03888; Sat, 7 Oct 1995 02:18:14 GMT
Received: from chopin.ucc.hull.ac.uk by coulomb.eng.ohio-state.edu
via ESMTP (940816.SGI.8.6.9/940406.SGI) for <DIY_EFI at coulomb.eng.ohio-state.edu>
id WAA03873; Fri, 6 Oct 1995 22:18:11 -0400
From: postmaster at hull.ac.uk
Message-Id: <199510070218.WAA03873 at coulomb.eng.ohio-state.edu>
Received: from hull.ac.uk by mailhub1.hull.ac.uk
id <15588-0 at mailhub1.hull.ac.uk>; Sat, 7 Oct 1995 03:12:05 +0100
Date: Sat, 7 Oct 1995 03:12:00 +0100
To: DIY_EFI at coulomb.eng.ohio-state.edu
Subject: Mail for:- n.mulvana at e-eng.hull.ac.uk
Sender: owner-diy_efi at coulomb.eng.ohio-state.edu
Precedence: bulk
Reply-To: DIY_EFI at coulomb.eng.ohio-state.edu
Hi,
This message has been generated in response to your message below.
The central mail system is unable to deliver your message
as there are a number of people with the same initials and surnames.
Please select the appropriate e-mail address from the list shown below
and try again:-
Any questions or problems, please call or email
Alex Sharaz
Voice +44 1482 465700
Janet:A.Sharaz at uk.ac.hull.ucc
Internet:A.Sharaz at ucc.hull.ac.uk
----
===============================
/usr/local/bin/osimail: Command not found
===============================
Your Message:-
Received: from coulomb.eng.ohio-state.edu by chopin with SMTP internet(PP);
Sat, 7 Oct 1995 03:11:01 +0100
Received: by coulomb.eng.ohio-state.edu (940816.SGI.8.6.9/940406.SGI) for diy_efi-outgoing
id BAA03652; Sat, 7 Oct 1995 01:12:12 GMT
Received: from dione.gi.com by coulomb.eng.ohio-state.edu
via ESMTP (940816.SGI.8.6.9/940406.SGI) for <DIY_EFI at coulomb.eng.ohio-state.edu>
id VAA03638; Fri, 6 Oct 1995 21:12:09 -0400
Received: from gismtpgate.gi.com (po1.gi.com)
by VCA.GI.COM (PMDF V5.0-5 #7516) id <01HW4NVXG6AOK6PEA6 at VCA.GI.COM>
for DIY_EFI at coulomb.eng.ohio-state.edu;
Fri, 06 Oct 1995 18:11:42 -0700 (PDT)
Received: by gismtpgate.gi.com with Microsoft Mail
id <3075D3B6 at gismtpgate.gi.com>;
Fri, 06 Oct 1995 18:11:18 -0700 (PDT)
Date: Fri, 06 Oct 1995 18:11:00 -0700 (PDT)
From: "Zublin, Bryan (SD-MS)" <BZUBLIN at PO2.GI.COM>
Subject: Haltech throttle bodies and Re: Fuel injection questions
To: "diy_efi (postings)" <DIY_EFI at coulomb.eng.ohio-state.edu>
Message-id: <3075D3B6 at gismtpgate.gi.com>
X-Mailer: Microsoft Mail V3.0
Content-transfer-encoding: 7BIT
Encoding: 26 TEXT
Sender: owner-diy_efi at coulomb.eng.ohio-state.edu
Precedence: bulk
Reply-To: DIY_EFI at coulomb.eng.ohio-state.edu
Tom "How could the motor be too lean?" Walter writes:
>REVERSIONS: While we all realize the the closing of the intake valve
>will cause a "back pulse" of air through the intake track, I was not
>really aware of how critical it could be. An engine builder could not
>get enough fuel into an injected engine... at WOT the engine was running
>LEAN, despite "having more than enough fuel to flood it". Hmm, problem
>was a unique reversion pattern. Rather than the usual area around the
>intake walls, there was ALSO an effected area in the middle. Dead center
>of the intake area of the FUEL injector jet!!! The reversion pulse of this
>radically cammed motor was enough to blow fuel back out the short intake
>track! [Haltech throttle bodies... look like Weber DCOE's with an injector
>port]. Result was interesting . So when done with all the calculations,
>and theories, it is great fun to get it all blown back in your face! ;-)
Tom,
What was the solution to this problem? Different cam timing? Moved
injector?
Has anyone else on this list used the Haltech throttle bodies? I have
considered using them in place of the Weber DCOE carbs on my 1980 Toyota
Celica.
Bryan Zublin
bzublin at gi.com
More information about the Diy_efi
mailing list