I HAVE AT LEAST 60 copies of this message. WHY??

kozuhia at latcs1.lat.oz.au kozuhia at latcs1.lat.oz.au
Sat Oct 7 12:39:41 GMT 1995


> 
> Hi,
>  This message has been generated in response to your message below.
> The central mail system is unable to deliver your message
> as there are a number of people with the same initials and surnames.
> Please select the appropriate e-mail address from the list shown below 
> and try again:-
> 
> 
> Any questions or problems, please call or email
>     Alex Sharaz
>     Voice +44 1482 465700
> Janet:A.Sharaz at uk.ac.hull.ucc
> Internet:A.Sharaz at ucc.hull.ac.uk
> 
> ----
> ===============================
> /usr/local/bin/osimail: Command not found
> ===============================
> Your Message:-
> Received: from coulomb.eng.ohio-state.edu by chopin with SMTP internet(PP);
>           Sat, 7 Oct 1995 12:21:20 +0100
> Received: by coulomb.eng.ohio-state.edu (940816.SGI.8.6.9/940406.SGI)	for diy_efi-outgoing 
>           id KAA06573; Sat, 7 Oct 1995 10:25:48 GMT
> Received: from chopin.ucc.hull.ac.uk by coulomb.eng.ohio-state.edu 
>           via ESMTP (940816.SGI.8.6.9/940406.SGI)	for <DIY_EFI at coulomb.eng.ohio-state.edu> 
>           id GAA06552; Sat, 7 Oct 1995 06:25:43 -0400
> From: postmaster at hull.ac.uk
> Message-Id: <199510071025.GAA06552 at coulomb.eng.ohio-state.edu>
> Received: from hull.ac.uk by mailhub1.hull.ac.uk           
>           id <24608-0 at mailhub1.hull.ac.uk>; Sat, 7 Oct 1995 11:19:03 +0100
> Date:     Sat, 7 Oct 1995 11:19:00 +0100
> To: DIY_EFI at coulomb.eng.ohio-state.edu
> Subject:  Mail for:- n.mulvana at e-eng.hull.ac.uk 
> Sender: owner-diy_efi at coulomb.eng.ohio-state.edu
> Precedence: bulk
> Reply-To: DIY_EFI at coulomb.eng.ohio-state.edu
> 
> Hi,
>  This message has been generated in response to your message below.
> The central mail system is unable to deliver your message
> as there are a number of people with the same initials and surnames.
> Please select the appropriate e-mail address from the list shown below 
> and try again:-
> 
> 
> Any questions or problems, please call or email
>     Alex Sharaz
>     Voice +44 1482 465700
> Janet:A.Sharaz at uk.ac.hull.ucc
> Internet:A.Sharaz at ucc.hull.ac.uk
> 
> ----
> ===============================
> /usr/local/bin/osimail: Command not found
> ===============================
> Your Message:-
> Received: from coulomb.eng.ohio-state.edu by chopin with SMTP internet(PP);
>           Sat, 7 Oct 1995 11:18:43 +0100
> Received: by coulomb.eng.ohio-state.edu (940816.SGI.8.6.9/940406.SGI)	for diy_efi-outgoing 
>           id JAA06184; Sat, 7 Oct 1995 09:16:24 GMT
> Received: from chopin.ucc.hull.ac.uk by coulomb.eng.ohio-state.edu 
>           via ESMTP (940816.SGI.8.6.9/940406.SGI)	for <DIY_EFI at coulomb.eng.ohio-state.edu> 
>           id FAA06169; Sat, 7 Oct 1995 05:16:19 -0400
> From: postmaster at hull.ac.uk
> Message-Id: <199510070916.FAA06169 at coulomb.eng.ohio-state.edu>
> Received: from hull.ac.uk by mailhub1.hull.ac.uk           
>           id <23572-0 at mailhub1.hull.ac.uk>; Sat, 7 Oct 1995 10:09:37 +0100
> Date:     Sat, 7 Oct 1995 10:09:35 +0100
> To: DIY_EFI at coulomb.eng.ohio-state.edu
> Subject:  Mail for:- n.mulvana at e-eng.hull.ac.uk 
> Sender: owner-diy_efi at coulomb.eng.ohio-state.edu
> Precedence: bulk
> Reply-To: DIY_EFI at coulomb.eng.ohio-state.edu
> 
> Hi,
>  This message has been generated in response to your message below.
> The central mail system is unable to deliver your message
> as there are a number of people with the same initials and surnames.
> Please select the appropriate e-mail address from the list shown below 
> and try again:-
> 
> 
> Any questions or problems, please call or email
>     Alex Sharaz
>     Voice +44 1482 465700
> Janet:A.Sharaz at uk.ac.hull.ucc
> Internet:A.Sharaz at ucc.hull.ac.uk
> 
> ----
> ===============================
> /usr/local/bin/osimail: Command not found
> ===============================
> Your Message:-
> Received: from coulomb.eng.ohio-state.edu by chopin with SMTP internet(PP);
>           Sat, 7 Oct 1995 10:06:37 +0100
> Received: by coulomb.eng.ohio-state.edu (940816.SGI.8.6.9/940406.SGI)	for diy_efi-outgoing 
>           id IAA05888; Sat, 7 Oct 1995 08:20:10 GMT
> Received: from chopin.ucc.hull.ac.uk by coulomb.eng.ohio-state.edu 
>           via ESMTP (940816.SGI.8.6.9/940406.SGI)	for <DIY_EFI at coulomb.eng.ohio-state.edu> 
>           id EAA05874; Sat, 7 Oct 1995 04:20:06 -0400
> From: postmaster at hull.ac.uk
> Message-Id: <199510070820.EAA05874 at coulomb.eng.ohio-state.edu>
> Received: from hull.ac.uk by mailhub1.hull.ac.uk           
>           id <22828-0 at mailhub1.hull.ac.uk>; Sat, 7 Oct 1995 09:14:08 +0100
> Date:     Sat, 7 Oct 1995 09:14:02 +0100
> To: DIY_EFI at coulomb.eng.ohio-state.edu
> Subject:  Mail for:- n.mulvana at e-eng.hull.ac.uk 
> Sender: owner-diy_efi at coulomb.eng.ohio-state.edu
> Precedence: bulk
> Reply-To: DIY_EFI at coulomb.eng.ohio-state.edu
> 
> Hi,
>  This message has been generated in response to your message below.
> The central mail system is unable to deliver your message
> as there are a number of people with the same initials and surnames.
> Please select the appropriate e-mail address from the list shown below 
> and try again:-
> 
> 
> Any questions or problems, please call or email
>     Alex Sharaz
>     Voice +44 1482 465700
> Janet:A.Sharaz at uk.ac.hull.ucc
> Internet:A.Sharaz at ucc.hull.ac.uk
> 
> ----
> ===============================
> /usr/local/bin/osimail: Command not found
> ===============================
> Your Message:-
> Received: from coulomb.eng.ohio-state.edu by chopin with SMTP internet(PP);
>           Sat, 7 Oct 1995 09:13:21 +0100
> Received: by coulomb.eng.ohio-state.edu (940816.SGI.8.6.9/940406.SGI)	for diy_efi-outgoing 
>           id HAA05611; Sat, 7 Oct 1995 07:27:46 GMT
> Received: from chopin.ucc.hull.ac.uk by coulomb.eng.ohio-state.edu 
>           via ESMTP (940816.SGI.8.6.9/940406.SGI)	for <DIY_EFI at coulomb.eng.ohio-state.edu> 
>           id DAA05597; Sat, 7 Oct 1995 03:27:42 -0400
> From: postmaster at hull.ac.uk
> Message-Id: <199510070727.DAA05597 at coulomb.eng.ohio-state.edu>
> Received: from hull.ac.uk by mailhub1.hull.ac.uk           
>           id <21968-0 at mailhub1.hull.ac.uk>; Sat, 7 Oct 1995 08:19:42 +0100
> Date:     Sat, 7 Oct 1995 08:19:41 +0100
> To: DIY_EFI at coulomb.eng.ohio-state.edu
> Subject:  Mail for:- n.mulvana at e-eng.hull.ac.uk 
> Sender: owner-diy_efi at coulomb.eng.ohio-state.edu
> Precedence: bulk
> Reply-To: DIY_EFI at coulomb.eng.ohio-state.edu
> 
> Hi,
>  This message has been generated in response to your message below.
> The central mail system is unable to deliver your message
> as there are a number of people with the same initials and surnames.
> Please select the appropriate e-mail address from the list shown below 
> and try again:-
> 
> 
> Any questions or problems, please call or email
>     Alex Sharaz
>     Voice +44 1482 465700
> Janet:A.Sharaz at uk.ac.hull.ucc
> Internet:A.Sharaz at ucc.hull.ac.uk
> 
> ----
> ===============================
> /usr/local/bin/osimail: Command not found
> ===============================
> Your Message:-
> Received: from coulomb.eng.ohio-state.edu by chopin with SMTP internet(PP);
>           Sat, 7 Oct 1995 08:18:52 +0100
> Received: by coulomb.eng.ohio-state.edu (940816.SGI.8.6.9/940406.SGI)	for diy_efi-outgoing 
>           id GAA05212; Sat, 7 Oct 1995 06:20:02 GMT
> Received: from chopin.ucc.hull.ac.uk by coulomb.eng.ohio-state.edu 
>           via ESMTP (940816.SGI.8.6.9/940406.SGI)	for <DIY_EFI at coulomb.eng.ohio-state.edu> 
>           id CAA05198; Sat, 7 Oct 1995 02:19:57 -0400
> From: postmaster at hull.ac.uk
> Message-Id: <199510070619.CAA05198 at coulomb.eng.ohio-state.edu>
> Received: from hull.ac.uk by mailhub1.hull.ac.uk           
>           id <20736-0 at mailhub1.hull.ac.uk>; Sat, 7 Oct 1995 07:10:38 +0100
> Date:     Sat, 7 Oct 1995 07:10:36 +0100
> To: DIY_EFI at coulomb.eng.ohio-state.edu
> Subject:  Mail for:- n.mulvana at e-eng.hull.ac.uk 
> Sender: owner-diy_efi at coulomb.eng.ohio-state.edu
> Precedence: bulk
> Reply-To: DIY_EFI at coulomb.eng.ohio-state.edu
> 
> Hi,
>  This message has been generated in response to your message below.
> The central mail system is unable to deliver your message
> as there are a number of people with the same initials and surnames.
> Please select the appropriate e-mail address from the list shown below 
> and try again:-
> 
> 
> Any questions or problems, please call or email
>     Alex Sharaz
>     Voice +44 1482 465700
> Janet:A.Sharaz at uk.ac.hull.ucc
> Internet:A.Sharaz at ucc.hull.ac.uk
> 
> ----
> ===============================
> /usr/local/bin/osimail: Command not found
> ===============================
> Your Message:-
> Received: from coulomb.eng.ohio-state.edu by chopin with SMTP internet(PP);
>           Sat, 7 Oct 1995 07:10:23 +0100
> Received: by coulomb.eng.ohio-state.edu (940816.SGI.8.6.9/940406.SGI)	for diy_efi-outgoing 
>           id FAA04868; Sat, 7 Oct 1995 05:16:53 GMT
> Received: from chopin.ucc.hull.ac.uk by coulomb.eng.ohio-state.edu 
>           via ESMTP (940816.SGI.8.6.9/940406.SGI)	for <DIY_EFI at coulomb.eng.ohio-state.edu> 
>           id BAA04854; Sat, 7 Oct 1995 01:16:47 -0400
> From: postmaster at hull.ac.uk
> Message-Id: <199510070516.BAA04854 at coulomb.eng.ohio-state.edu>
> Received: from hull.ac.uk by mailhub1.hull.ac.uk           
>           id <19133-0 at mailhub1.hull.ac.uk>; Sat, 7 Oct 1995 06:08:07 +0100
> Date:     Sat, 7 Oct 1995 06:08:05 +0100
> To: DIY_EFI at coulomb.eng.ohio-state.edu
> Subject:  Mail for:- n.mulvana at e-eng.hull.ac.uk 
> Sender: owner-diy_efi at coulomb.eng.ohio-state.edu
> Precedence: bulk
> Reply-To: DIY_EFI at coulomb.eng.ohio-state.edu
> 
> Hi,
>  This message has been generated in response to your message below.
> The central mail system is unable to deliver your message
> as there are a number of people with the same initials and surnames.
> Please select the appropriate e-mail address from the list shown below 
> and try again:-
> 
> 
> Any questions or problems, please call or email
>     Alex Sharaz
>     Voice +44 1482 465700
> Janet:A.Sharaz at uk.ac.hull.ucc
> Internet:A.Sharaz at ucc.hull.ac.uk
> 
> ----
> ===============================
> /usr/local/bin/osimail: Command not found
> ===============================
> Your Message:-
> Received: from coulomb.eng.ohio-state.edu by chopin with SMTP internet(PP);
>           Sat, 7 Oct 1995 06:07:51 +0100
> Received: by coulomb.eng.ohio-state.edu (940816.SGI.8.6.9/940406.SGI)	for diy_efi-outgoing 
>           id EAA04446; Sat, 7 Oct 1995 04:08:50 GMT
> Received: from chopin.ucc.hull.ac.uk by coulomb.eng.ohio-state.edu 
>           via ESMTP (940816.SGI.8.6.9/940406.SGI)	for <DIY_EFI at coulomb.eng.ohio-state.edu> 
>           id AAA04432; Sat, 7 Oct 1995 00:08:45 -0400
> From: postmaster at hull.ac.uk
> Message-Id: <199510070408.AAA04432 at coulomb.eng.ohio-state.edu>
> Received: from hull.ac.uk by mailhub1.hull.ac.uk           
>           id <18103-0 at mailhub1.hull.ac.uk>; Sat, 7 Oct 1995 05:01:50 +0100
> Date:     Sat, 7 Oct 1995 05:01:44 +0100
> To: DIY_EFI at coulomb.eng.ohio-state.edu
> Subject:  Mail for:- n.mulvana at e-eng.hull.ac.uk 
> Sender: owner-diy_efi at coulomb.eng.ohio-state.edu
> Precedence: bulk
> Reply-To: DIY_EFI at coulomb.eng.ohio-state.edu
> 
> Hi,
>  This message has been generated in response to your message below.
> The central mail system is unable to deliver your message
> as there are a number of people with the same initials and surnames.
> Please select the appropriate e-mail address from the list shown below 
> and try again:-
> 
> 
> Any questions or problems, please call or email
>     Alex Sharaz
>     Voice +44 1482 465700
> Janet:A.Sharaz at uk.ac.hull.ucc
> Internet:A.Sharaz at ucc.hull.ac.uk
> 
> ----
> ===============================
> /usr/local/bin/osimail: Command not found
> ===============================
> Your Message:-
> Received: from coulomb.eng.ohio-state.edu by chopin with SMTP internet(PP);
>           Sat, 7 Oct 1995 05:01:11 +0100
> Received: by coulomb.eng.ohio-state.edu (940816.SGI.8.6.9/940406.SGI)	for diy_efi-outgoing 
>           id DAA04193; Sat, 7 Oct 1995 03:24:37 GMT
> Received: from spsgate.sps.mot.com by coulomb.eng.ohio-state.edu 
>           via SMTP (940816.SGI.8.6.9/940406.SGI)	for <DIY_EFI at coulomb.eng.ohio-state.edu> 
>           id XAA04179; Fri, 6 Oct 1995 23:24:34 -0400
> Received: from mogate (mogate.sps.mot.com) 
>           by spsgate.sps.mot.com (4.1/SMI-4.1/Email 2.1 10/25/93)	id AA04728 
>           for DIY_EFI at coulomb.eng.ohio-state.edu; Fri, 6 Oct 95 20:24:16 MST
> Received: from txbc.sps.mot.com ([192.88.171.200]) 
>           by mogate (4.1/SMI-4.1/Email-2.0)	id AA00706;
>           Fri, 6 Oct 95 20:24:15 MST
> Received: from roadster.sps.mot.com by txbc.sps.mot.com 
>           with SMTP	(1.38.193.4/16.2) id AA05683; Fri, 6 Oct 95 22:24:14 -0500
> Received: by roadster.autotest (4.1/SMI-4.1)	id AA26349;
>           Fri, 6 Oct 95 22:20:21 CDT
> Date: Fri, 6 Oct 95 22:20:21 CDT
> From: walter at roadster.sps.mot.com (thomas walter x5955)
> Message-Id: <9510070320.AA26349 at roadster.autotest>
> To: DIY_EFI at coulomb.eng.ohio-state.edu
> Subject: Re:  Haltech throttle bodies and Re: Fuel injection questions
> Sender: owner-diy_efi at coulomb.eng.ohio-state.edu
> Precedence: bulk
> Reply-To: DIY_EFI at coulomb.eng.ohio-state.edu
> 
> Solution to the reversion problem dealt with the intake manifold. The
> revised manifold was slightly different. Seems the port - intake manifold
> - injector location was at some critical point at the desired rpm.
> 
> Wave theory is just one of those things I would not think about, but
> came into play on that design (remember it was a race engine, with
> a radical cam... ). No, I did not have anything to do with the solution. 
> 
> Perhaps one of those "why didn't I think of that" was the elimination
> of the air pumps and the additions of reed relays to the air cleaner
> housing. First time I saw that (under the hood of a Datsun), it really
> took along time to figure out what they had done. Despite having built
> and played with two stroke motorcycles, it was not exactly clear WHY
> it worked. Once it dawned on me, it seemed almost too simple of a
> solution. ;-)
> 
> --Tom
> 


-- 




More information about the Diy_efi mailing list