Mail for:- n.mulvana at e-eng.hull.ac.uk
postmaster at hull.ac.uk
postmaster at hull.ac.uk
Sat Oct 7 22:51:31 GMT 1995
Hi,
This message has been generated in response to your message below.
The central mail system is unable to deliver your message
as there are a number of people with the same initials and surnames.
Please select the appropriate e-mail address from the list shown below
and try again:-
Any questions or problems, please call or email
Alex Sharaz
Voice +44 1482 465700
Janet:A.Sharaz at uk.ac.hull.ucc
Internet:A.Sharaz at ucc.hull.ac.uk
----
===============================
/usr/local/bin/osimail: Command not found
===============================
Your Message:-
Received: from coulomb.eng.ohio-state.edu by chopin with SMTP internet(PP);
Sat, 7 Oct 1995 23:43:25 +0100
Received: by coulomb.eng.ohio-state.edu (940816.SGI.8.6.9/940406.SGI) for diy_efi-outgoing
id WAA12470; Sat, 7 Oct 1995 22:03:59 GMT
Received: from chopin.ucc.hull.ac.uk by coulomb.eng.ohio-state.edu
via ESMTP (940816.SGI.8.6.9/940406.SGI) for <DIY_EFI at coulomb.eng.ohio-state.edu>
id SAA12456; Sat, 7 Oct 1995 18:03:51 -0400
From: postmaster at hull.ac.uk
Message-Id: <199510072203.SAA12456 at coulomb.eng.ohio-state.edu>
Received: from hull.ac.uk by mailhub1.hull.ac.uk
id <06297-0 at mailhub1.hull.ac.uk>; Sat, 7 Oct 1995 22:56:21 +0100
Date: Sat, 7 Oct 1995 22:56:19 +0100
To: DIY_EFI at coulomb.eng.ohio-state.edu
Subject: Mail for:- n.mulvana at e-eng.hull.ac.uk
Sender: owner-diy_efi at coulomb.eng.ohio-state.edu
Precedence: bulk
Reply-To: DIY_EFI at coulomb.eng.ohio-state.edu
Hi,
This message has been generated in response to your message below.
The central mail system is unable to deliver your message
as there are a number of people with the same initials and surnames.
Please select the appropriate e-mail address from the list shown below
and try again:-
Any questions or problems, please call or email
Alex Sharaz
Voice +44 1482 465700
Janet:A.Sharaz at uk.ac.hull.ucc
Internet:A.Sharaz at ucc.hull.ac.uk
----
===============================
/usr/local/bin/osimail: Command not found
===============================
Your Message:-
Received: from coulomb.eng.ohio-state.edu by chopin with SMTP internet(PP);
Sat, 7 Oct 1995 22:56:05 +0100
Received: by coulomb.eng.ohio-state.edu (940816.SGI.8.6.9/940406.SGI) for diy_efi-outgoing
id VAA11922; Sat, 7 Oct 1995 21:05:41 GMT
Received: from chopin.ucc.hull.ac.uk by coulomb.eng.ohio-state.edu
via ESMTP (940816.SGI.8.6.9/940406.SGI) for <DIY_EFI at coulomb.eng.ohio-state.edu>
id RAA11907; Sat, 7 Oct 1995 17:05:33 -0400
From: postmaster at hull.ac.uk
Message-Id: <199510072105.RAA11907 at coulomb.eng.ohio-state.edu>
Received: from hull.ac.uk by mailhub1.hull.ac.uk
id <05432-0 at mailhub1.hull.ac.uk>; Sat, 7 Oct 1995 21:55:38 +0100
Date: Sat, 7 Oct 1995 21:55:36 +0100
To: DIY_EFI at coulomb.eng.ohio-state.edu
Subject: Mail for:- n.mulvana at e-eng.hull.ac.uk
Sender: owner-diy_efi at coulomb.eng.ohio-state.edu
Precedence: bulk
Reply-To: DIY_EFI at coulomb.eng.ohio-state.edu
Hi,
This message has been generated in response to your message below.
The central mail system is unable to deliver your message
as there are a number of people with the same initials and surnames.
Please select the appropriate e-mail address from the list shown below
and try again:-
Any questions or problems, please call or email
Alex Sharaz
Voice +44 1482 465700
Janet:A.Sharaz at uk.ac.hull.ucc
Internet:A.Sharaz at ucc.hull.ac.uk
----
===============================
/usr/local/bin/osimail: Command not found
===============================
Your Message:-
Received: from coulomb.eng.ohio-state.edu by chopin with SMTP internet(PP);
Sat, 7 Oct 1995 21:55:21 +0100
Received: by coulomb.eng.ohio-state.edu (940816.SGI.8.6.9/940406.SGI) for diy_efi-outgoing
id UAA11249; Sat, 7 Oct 1995 20:04:04 GMT
Received: from chopin.ucc.hull.ac.uk by coulomb.eng.ohio-state.edu
via ESMTP (940816.SGI.8.6.9/940406.SGI) for <DIY_EFI at coulomb.eng.ohio-state.edu>
id QAA11231; Sat, 7 Oct 1995 16:03:59 -0400
From: postmaster at hull.ac.uk
Message-Id: <199510072003.QAA11231 at coulomb.eng.ohio-state.edu>
Received: from hull.ac.uk by mailhub1.hull.ac.uk
id <04355-0 at mailhub1.hull.ac.uk>; Sat, 7 Oct 1995 20:57:45 +0100
Date: Sat, 7 Oct 1995 20:57:43 +0100
To: DIY_EFI at coulomb.eng.ohio-state.edu
Subject: Mail for:- n.mulvana at e-eng.hull.ac.uk
Sender: owner-diy_efi at coulomb.eng.ohio-state.edu
Precedence: bulk
Reply-To: DIY_EFI at coulomb.eng.ohio-state.edu
Hi,
This message has been generated in response to your message below.
The central mail system is unable to deliver your message
as there are a number of people with the same initials and surnames.
Please select the appropriate e-mail address from the list shown below
and try again:-
Any questions or problems, please call or email
Alex Sharaz
Voice +44 1482 465700
Janet:A.Sharaz at uk.ac.hull.ucc
Internet:A.Sharaz at ucc.hull.ac.uk
----
===============================
/usr/local/bin/osimail: Command not found
===============================
Your Message:-
Received: from coulomb.eng.ohio-state.edu by chopin with SMTP internet(PP);
Sat, 7 Oct 1995 20:57:14 +0100
Received: by coulomb.eng.ohio-state.edu (940816.SGI.8.6.9/940406.SGI) for diy_efi-outgoing
id TAA10690; Sat, 7 Oct 1995 19:15:38 GMT
Received: from chopin.ucc.hull.ac.uk by coulomb.eng.ohio-state.edu
via ESMTP (940816.SGI.8.6.9/940406.SGI) for <DIY_EFI at coulomb.eng.ohio-state.edu>
id PAA10676; Sat, 7 Oct 1995 15:15:34 -0400
From: postmaster at hull.ac.uk
Message-Id: <199510071915.PAA10676 at coulomb.eng.ohio-state.edu>
Received: from hull.ac.uk by mailhub1.hull.ac.uk
id <03485-0 at mailhub1.hull.ac.uk>; Sat, 7 Oct 1995 20:07:21 +0100
Date: Sat, 7 Oct 1995 20:07:20 +0100
To: DIY_EFI at coulomb.eng.ohio-state.edu
Subject: Mail for:- n.mulvana at e-eng.hull.ac.uk
Sender: owner-diy_efi at coulomb.eng.ohio-state.edu
Precedence: bulk
Reply-To: DIY_EFI at coulomb.eng.ohio-state.edu
Hi,
This message has been generated in response to your message below.
The central mail system is unable to deliver your message
as there are a number of people with the same initials and surnames.
Please select the appropriate e-mail address from the list shown below
and try again:-
Any questions or problems, please call or email
Alex Sharaz
Voice +44 1482 465700
Janet:A.Sharaz at uk.ac.hull.ucc
Internet:A.Sharaz at ucc.hull.ac.uk
----
===============================
/usr/local/bin/osimail: Command not found
===============================
Your Message:-
Received: from coulomb.eng.ohio-state.edu by chopin with SMTP internet(PP);
Sat, 7 Oct 1995 20:07:06 +0100
Received: by coulomb.eng.ohio-state.edu (940816.SGI.8.6.9/940406.SGI) for diy_efi-outgoing
id SAA09840; Sat, 7 Oct 1995 18:11:20 GMT
Received: from chopin.ucc.hull.ac.uk by coulomb.eng.ohio-state.edu
via ESMTP (940816.SGI.8.6.9/940406.SGI) for <DIY_EFI at coulomb.eng.ohio-state.edu>
id OAA09825; Sat, 7 Oct 1995 14:11:15 -0400
From: postmaster at hull.ac.uk
Message-Id: <199510071811.OAA09825 at coulomb.eng.ohio-state.edu>
Received: from hull.ac.uk by mailhub1.hull.ac.uk
id <02517-0 at mailhub1.hull.ac.uk>; Sat, 7 Oct 1995 19:04:54 +0100
Date: Sat, 7 Oct 1995 19:04:51 +0100
To: DIY_EFI at coulomb.eng.ohio-state.edu
Subject: Mail for:- n.mulvana at e-eng.hull.ac.uk
Sender: owner-diy_efi at coulomb.eng.ohio-state.edu
Precedence: bulk
Reply-To: DIY_EFI at coulomb.eng.ohio-state.edu
Hi,
This message has been generated in response to your message below.
The central mail system is unable to deliver your message
as there are a number of people with the same initials and surnames.
Please select the appropriate e-mail address from the list shown below
and try again:-
Any questions or problems, please call or email
Alex Sharaz
Voice +44 1482 465700
Janet:A.Sharaz at uk.ac.hull.ucc
Internet:A.Sharaz at ucc.hull.ac.uk
----
===============================
/usr/local/bin/osimail: Command not found
===============================
Your Message:-
Received: from coulomb.eng.ohio-state.edu by chopin with SMTP internet(PP);
Sat, 7 Oct 1995 19:04:36 +0100
Received: by coulomb.eng.ohio-state.edu (940816.SGI.8.6.9/940406.SGI) for diy_efi-outgoing
id RAA09153; Sat, 7 Oct 1995 17:14:11 GMT
Received: from echo.i-link.net by coulomb.eng.ohio-state.edu
via SMTP (940816.SGI.8.6.9/940406.SGI) for <DIY_EFI at coulomb.eng.ohio-state.edu>
id NAA09139; Sat, 7 Oct 1995 13:14:09 -0400
Received: from sanantonio-1-7.i-link.net
by echo.i-link.net (AIX 3.2/UCB 5.64/4.03) id AA30731;
Sat, 7 Oct 1995 12:13:41 -0500
Message-Id: <9510071713.AA30731 at echo.i-link.net>
Comments: Authenticated sender is <Sam_L_Smith at i-link.net>
From: "Sam L. Smith" <Sam.L.Smith at i-link.net>
Organization: SamWise InfoSystems
To: DIY_EFI at coulomb.eng.ohio-state.edu
Date: Sat, 7 Oct 1995 11:17:36 -6000
Subject: Re: Intel Hex to .S19 converter
Priority: normal
X-Mailer: Pegasus Mail for Windows (v2.01)
Sender: owner-diy_efi at coulomb.eng.ohio-state.edu
Precedence: bulk
Reply-To: DIY_EFI at coulomb.eng.ohio-state.edu
> Date: Fri, 6 Oct 1995 17:16:32 -0600 (MDT)
> From: CICIORA STEVEN JOSEP <ciciora at spot.colorado.edu>
> To: DIY_EFI at coulomb.eng.ohio-state.edu
> Subject: Intel Hex to .S19 converter
> Reply-to: DIY_EFI at coulomb.eng.ohio-state.edu
> O.K., One of my eprom programmers will only save a binary file, the other
> will save binary, or intel hex (but it will read *.s19 records!). So I
> got an image of the prom from my Beretta, and the SIM68 program from the
> Motorolla BBS, but SIM68 only wants *.s19 records. Anyone got any
> suggestions on how to convert binary files, or preferably intel hex files
> to motorola *.s19 records?
> Thanks for your time!
> -Steven Ciciora
>
>
>
I have written many such programs in the past, definitely including
binary -> Intel hex. But they hane disappeared over the years.
If someone will dig out their data book(s) and get me the spec's for
Intel hex and Motorola .S19, I'll do the dirty deed once again.
Later,
Sam
-----
"When the going gets weird, the weird turn pro." - HST
Sam_L_Smith at i-link.net Sam L. Smith
More information about the Diy_efi
mailing list