Newer VATS Vehicles

[John Faubion]

> Actually not...  All you need to do is build a little 555 oscillator
> circuit with quick connect wire tap connectors --- 2 power leads and
> one output lead ... pop the hood, find the right wire on the PCM
> (assuming F-Body where the PCM is mounted under the hood) or find
> the right wire under the dash ... tap the circuit into the "fuel
> enable" lead and presto..  For those with a "starter enable" relay,
> just unplug the relay and plug in a "enable jumper pack" ...

Donald I think it would still be easier with the tow truck than taking the
time with the hood up. Most people don't even give a tow truck a second
look. Someone picking around under the hood of a Corvette or under the dash
in a F-body might be a bit more noticeable.

John Faubion
jfaubion at beaches.net