SBC TPI manifold questions
FIScot at aol.com
FIScot at aol.com
Thu Feb 1 03:47:46 GMT 1996
Subj: Re: SBC TPI manifold questions
Date: 96-01-31 11:11:38 EST
From: jsg at coulomb.eng.ohio-state.edu (John S Gwynne)
> Manifold question:
> On the base plate there are three holes into the coolant passage. One
> still has a coolant temperature sensor (CTS), another a bypass hose to
> the throttle body, and the third is empty. What originally attached to
> this last location?
The timer/switch for the cold start injector.
> Throttle body questions:
> Q) I would guess the top hose connection on the right side is a for the
> charcoal canister (just filtered fresh air). Correct?
Filtered fresh air for the PCV system.
> Q) The second one down on the right looks like a "typical" vacuum port.
> Sound about right?
Like Charcoal cannister purge.
> Q) Now the tough one... there is a port vacuum signal near the left
> throttle plate that works its way down to the bottom left of the
> throttle body just behind the coolant passage. I have a hole here
> with no hose barb or anything. I assume something use to attach
> here; what?
I don't know for sure, but the EGR system uses ported vacuum.....
> Thanks for the help.
You are welcome. Scot Sealander FIScot at aol.com
More information about the Diy_efi
mailing list