Throttle Body Sizing
Orin Harding
NAMGBR at msn.com
Thu Jul 25 10:57:34 GMT 1996
A single 40mm TB sounds alittle restrictive for your application. But you
won't flow over 500cfm, like you calculate. I don't know enough about MGs
to recommend a specific size TB. Just as a comparison, my 5.7l V8 uses
twin 48mm TBs w/ 5800rpm redline.
Markus,
I'm going to try a twin 40 mm throttle body which should flow 400+ CFM. That
should be close to the same flow as the twin SU HS-4 (1.5") carbs that were
used on the early MGB's.
Orin
More information about the Diy_efi
mailing list