Diesel MAF-sensor?

Gary W Harris Gary_W_Harris at ccm.ch.intel.com
Thu Jul 25 22:47:20 GMT 1996


Text item: 

What about measuring the fuel flow--since the Dudsel operates at WOT, one could 
use RPM/VE to calculate airflow (similar to a EFI MAP system), throttle position
to measure fuel flow, thus get some reasonable approximation allowing 
particulate emission control.-- or perhaps fuel flow/injection timing needs to 
modulated to control particulates

Gary


Hans Hintermaier wrote:
>
>
> Can somebody tell me, what for I need MAF-sensoring in a diesel?
> I always thought a diesel takes as much air it can and regulates speed
> only with the amount of injected fuel?
>
> Hans
>
>This was not part of the diesel injection system, but rather part of
emission control system to control particulates.
Cheers.

Text item: External Message Header

The following mail header is for administrative use
and may be ignored unless there are problems.

***IF THERE ARE PROBLEMS SAVE THESE HEADERS***.

Reply-To: diy_efi at coulomb.eng.ohio-state.edu
Precedence: bulk
Sender: owner-diy_efi at coulomb.eng.ohio-state.edu
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=us-ascii
References: <1BE1200531A at brain.nefo.med.uni-muenchen.de>
Subject: Re: Diesel MAF-sensor?
To: diy_efi at coulomb.eng.ohio-state.edu
MIME-Version: 1.0
X-Mailer: Mozilla 2.01 (Win16; U)
From: "Michael D. Porter" <mdporter at Rt66.com>
Date: Thu, 25 Jul 1996 09:24:27 -0700
Message-ID: <31F79FBB.775A at rt66.com>
Received: from pmf10.rt66.com (pmf10.rt66.com [206.206.85.30]) by Rt66.com (8.7.
5/8.7.3) with SMTP id JAA19256 for <diy_efi at coulomb.eng.ohio-state.edu>; Thu, 25
 Jul 1996 09:27:01 -0600 (MDT)
Received: from Rt66.com by coulomb.eng.ohio-state.edu via ESMTP (940816.SGI.8.6.
9/940406.SGI)
     for <diy_efi at coulomb.eng.ohio-state.edu> id LAA00989; Thu, 25 Jul 1996 11:2
8:26 -0400
Received: by coulomb.eng.ohio-state.edu (940816.SGI.8.6.9/940406.SGI)
      id PAA00994; Thu, 25 Jul 1996 15:28:29 GMT
Received: from coulomb.eng.ohio-state.edu (coulomb.eng.ohio-state.edu [128.146.9
0.150]) by ormail.intel.com (8.7.4/8.7.3) with SMTP id JAA16179 for <gary_w_harr
is at ccm.ch.intel.com>; Thu, 25 Jul 1996 09:53:07 -0700 (PDT)
Received: from ormail.intel.com (ormail.intel.com [134.134.248.3]) by relay.jf.i
ntel.com (8.7.4/8.7.3) with ESMTP id JAA00615 for <gary_w_harris at ccm.ch.intel.co
m>; Thu, 25 Jul 1996 09:53:06 -0700 (PDT)
Return-Path: owner-diy_efi-outgoing at coulomb.eng.ohio-state.edu



More information about the Diy_efi mailing list