Proper Mixture.

[John Dammeyer]

At 04:20 PM 30/07/1996 -0500, you wrote:
>>John:
>>
>>Here is a web page that will probably answer some of your questions about
>>the O2 sensor: 
>>
>>http://ram.chem.tulane.edu:8080/f-body/trivia/o2sensor.html

Great WEB page!!!!
>>
>
>>BTW, what injectors are you using for a motor that small and what kinds of
>>rail pressures are you using?

I haven't decided if I want to inject that small a motor.  The choices are
Propane, Gasoline with a variable venture (ie: throttle slide), a miniature
SU carb or injection.  Injection sounds like an interesting project but then
I would need to worry about a fuel pump that delivers at least 45PSI.  The
injector could be just about anything I guess as the time interval is the
important part.

I'll probably start with a simple throttle slide carb so that I can
instrument and develop some baseline information on mixture etc.  If a cheap
fuel pump would show up,  well, then perhaps injection would be fun.

John.
 
Pioneers are the ones, face down in the mud,
with arrows in their backs.
Automation Artisans Inc.      Ph. 604-544-4950
6468 Loganberry Place         Fax 604-544-4954
Victoria BC CANADA V8Z 7E6