FORSALE: Engine Management System, Haltech E6

[Jeremy Pronk]

I am considering selling the EMS system installed in my alfa. I would love
to keep it, but if someone offers me enough, I need the money! (And will
have to go back to carbies).

The system is a Haltech E6, some specs (out of manual) are below:

Outputs

-Controls 1-8 multipoint injectors
-IAC
-Ignition drive out
-Programmable general purpose output (NOS etc)
-Fuel pump power

Input

-MAP
-Programmable general purpose input
-Coolant and intake air temp's
-TPS
-Engine speed pickup
-Optional EGO

Adjustable features

-Fuel and ignition control
-Programmable general purpose output
-Real time emulation (Haltech can be programmed while engine is running)
-Fuel cut on decel
-Datalog
-Closed loop
-rpm limiter
-Idle speed strategy
-Adjustable accelerator pump
-Engine warm up cycles


You need an ibm-pc (eg laptop with serial port) to program the ecu, it
also comes with the software, manual and all the sensors (no EGO, I need
that) fuel pumps, 4 injectors, ignition thing, pressure regulator etc.

The system cost ~$4000 (including throttle bodies), but I am willing to
let it go for around $1700AUS. I may also be interested in selling without
the injectors/pumps or something. Just make me an offer!

btw, this system supposably has one of the "easiest" to tune software
programs on the market (bar charts, and quickmap functions rather than
tables of numbers).


regards,

Jeremy, Sydney AUSTRALIA 
http://www.st.nepean.uws.edu.au/~jpronk/
'83 AlfaSud Ti (Haltech E6 efi)