Oliver's ALDC converter

[Doug Rorem]

...
..
...
>>Oliver is into Fiero's, so naturaly, the only two motor/ecm combos that it
>>decodes completely are the VIN "9" 2.8L V6 and the VIN "R" 2.5L L4
>>
>>I've hooked it up to my VIN "S" '87 Camaro and it does decode most of the
>>values (rpm, IAC, coolant temp, TCC, integrator, TPS, O2 rich/lean, Loop,
>>etc.)  Some of the values that don't decode or I question are the MAT, MAF
>>(not suprised, the Fiero is a MAP system), and AC settings.  The car is 10
>>years old and has a flaky idle to start with, so I may have a few bad
>>sensors... I still have to go through the system sensor by sensor.  I'm not
>>getting an SES light or error codes, so nothing has failed completely.
>>
>>Oliver's web page is...
>>http://www.franken.de/users/degobah/luke/scantool.html
>>
>>hope this helps,
>>
>>
>>
>>

The URL is:

http://www.franken.de/users/dagobah/luke/scantool.html

--
Doug Rorem
University of Illinois at Chicago         (312)-996-5439  [voice]
EECS Department  RM 1120                  (312)-413-1065  [fax]
851 S. Morgan Street                      (708)-996-2226  [pager]
Chicago, IL 60607-7053                    rorem at uic.edu