Re(2): Subaru Fault Codes
Doug Robson
doug at cia.com.au
Mon Nov 25 20:32:00 GMT 1996
Cliff Tindall wrote:
>
> doug at cia.com.au,Internet writes:
> John Firkins wrote:
> >
> > Hi all
> >
> > Does anyone have any idea on where to find out about the fault codes from a
> > Subaru B2 cpu?
> > It was originally fitted to a quad cam EJ20 motor & was working well in my
> > Kombi until this morning. Now the ignition is momemtarily cut at revs above
> > 4k & the led on the cpu is flashing
> > 3 long,3 short,1long,2 short.
> >
> > TIA
> >
> > John Firkins
>
> Well, code 33 is speed sensor (gearbox)
> I fitted an EJ18 into a kombi and did not wire up the speed sensor(among a few
> others). In this configuration the engine would rev limit to about 4,000 revs.
> I grounded the Neutral drive switch (or gear and clutch switch) and this fixed
> the problem. (If the ecu thinks it is in Neutral it rev limits the system).
> BTW the EJ 18 was a top conversion, and I had 15,000 trouble free Klms, before
> I sold it.
> Top speed with the standard gearing was close enoght to 100mph (camper, pop
> top etc.)Scary thought eh!
>
> Cliff Tindall
>
> --
>
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> Onramp BBS - Perth, Australia http://www.onramp.com.au/
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Very clever cliff, well spotted
ill tell me friend at subaru'
see ya
--
|===============================================================|
| When I die, |
| I want to go in my sleep, like my grandfather, |
| not screaming like the passengers in his car. |
|---------------------------------------------------------------|
| Doug Robson (H) mailto:doug at cia.com.au |
| (W) mailto:Doug.Robson at chase.com |
| Sydney, Australia http://www.cia.com.au/doug |
|---------------------------------------------------------------|
| Club Car Racing Register of NSW | Thank God |
| 1992/93 Under 2 litre State Champion | for |
| http://www.clubcars.org.au | Gravity |
|===============================================================|
More information about the Diy_efi
mailing list