Re(2): Subaru Fault Codes

[Cliff Tindall]

crsm at oroboros.demon.co.uk,Internet writes:
So you mated the Subaru engine to the standard VW box without a
specially made adaptor?  I know that this is more the concern of things
like the kit-car list, but I would be interested to know how you went
about it.

Bye,
-- 
Chris Morriss
No I made my own adaptor. First I had to make a template using the engine and
gearbox as a reference, this MUST be done very acurately to avoid clutch
problems and gearbox shaft wear.
For a short answer, it took plenty of hours, and I had to modify/construct the
flywheel. If you are interested, I can give you the full story, but the
finished product had no clutch problems or vibrations of any kind. In
retrospect if I did the job again, I would not remove as much weight as I did
from the flywheel.

BTW I made a second adaptor :-)

Cliff Tindall


--

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
    Onramp BBS - Perth, Australia               http://www.onramp.com.au/
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-