ALDL to serial converter

[peter paul fenske]

At 09:34 AM 11/27/96 -0800, you wrote:
>What chip would be required to convert the ALDL signal from a 1991 ECM to a
>standard serial connector?  Would it be a matter of using something like an
>8031 or 68H11, reading them in on a i/o pin and some software to convert it?
>
>Scott
>
Best way is to hack a serial card. Remove the 4881 rs232 converter chip
and solder in a 7404 inverter. Then change the XTAL to 2 MHz as hans noted.

Later: peter