Haltech E6GM (was GM controllers)
Terry Hartman
txhartma at spdmail.spd.dsccc.com
Tue Oct 15 12:53:53 GMT 1996
>
> From: Jennifer Rose <javer96 at snowcrest.net>
>
> Hi Peter
>
> Thanks for the infomation. My project is 74 chevy pu with a TPI unit out of
> an 86 Camaro. The pu has been running for 2 years with the TPI unit. The
> main problem is hot restarts on a warm day. Wanted to remove the cold start
> injector and replace software from a 89 calpak. Other big problem is the
> negative back pressure EGR valve sets a code 32 under loads. Also wanted to
> change curves to better suit a pu. Any help would be wonderful.
>
> Thanks Vance
I assume that you've kept the MAF since it's the '86 ECM... Anyway,
I just heard about a Haltech E6GM controller that is supposed to
be a "plug-in" replacement for -some- of the older GM ECMs.
I guess I could call Haltech & get the real scoop on what the E6Gm
will fit. I do know that it will require removal of the MAF....
Does anyone have any insight on the Haltech E6GM? Please feel
free to repond...
thanks,
T.
--
Terry Hartman in Sachse, Tx
txhartma at spd.dsccc.com
More information about the Diy_efi
mailing list