Tach input from spark voltage ** ERROR **
tom cloud
cloud at hagar.ph.utexas.edu
Mon Oct 21 16:44:15 GMT 1996
>>
>>I've been working on various inductive tach schemes with some success. I
>>want to try a new approach which would be to take the input to the tach
>>from the "points" or "tach" signal from a car distributor (or whatever).
ERROR: *****************
>Example: to trigger a CMOS gate: put 100-k R in series.
>>From the gate input, put one diode with Anode connected to the supply,
>and the other with the Cathode connected to GND.
ERROR **** in the above ... I got it upside down. Switch
"Anode" and "Cathode" above, elst you'll have a shorted supply!!
[ snip da rest ]
Tom Cloud <cloud at peaches.ph.utexas.edu>
More information about the Diy_efi
mailing list