Lucas/Bosch Injector hole sizes

Robert W. Hughes rwhughe at hal-pc.org
Tue Apr 15 16:30:17 GMT 1997


Ford, Chrysler, and GM all seem to use dimensionally equivalent fuel
injectors. The MSD catalog gives the following dimensions for the
mounting:
Starting from the top-
1.14" for a depth of .250
a 45 degree taper for another .080
a 20 degree taper for another .090
an 0.060 radius on the bottom of each tapered section
a .551" through hole
Draw this out to see what it looks like
.551" is 14mm



More information about the Diy_efi mailing list