Inexpensive EPROM programmer

Tom Cloud cloud at peaches.ph.utexas.edu
Wed Apr 30 20:24:37 GMT 1997


>From:	Brad Sheridan [SMTP:sheridan at vanceandhines.com]
>Sent:	Wednesday, April 30, 1997 4:14 AM
>To:	diy_efi at coulomb.eng.ohio-state.edu
>Subject:	Inexpensive EPROM programmer
>
>  I'm looking for an EPROM programmer that can program 27c256 EPROMs, and
>connects to a computer via a serial port. I can't use it if it requires an
>internal card or parallel port. Does anyone know of an inexpensive 
>programmer
>that meets these two requirements?

I use one made by GTEK (not the accelerometer being discussed).
Runs off RS-232, has built in ASCII functions so it can
be used with a terminal only.  Can download and program
lotsa devices.  Don't have it here -- one of our faculty
has taken it.  I may never see it again  8^).  Seems it
costs about $400 or so.

Tom Cloud <cloud at peaches.ph.utexas.edu>



More information about the Diy_efi mailing list