injector bosses

[Simon Bosworth]

Garfield wrote:
> 
> On Fri, 29 Aug 1997 21:50:15 GMT, garfield at pilgrimhouse.com (Garfield)
> wrote:
> 
> >OTOH, it's not THAT hard to find higher temp epoxies. What you want is
> >an epoxy you heat to around 200degF to cure, and it will have a Tg
> >around 300-350degF. Ciba Adhesives makes a couple; I'll try and track
> >down part numbers and suppliers for for the list. OK?
> 
> OK, that wasn't as bad as I expected; heh, only took me 2 whole bloody
> hours on the phone; sheesh, I hope you guys appreciate this.
> 
> Oh alright, enough whining.
> 
> Ciba Adhesives (part of Ciba-Giegy)
> 
> Epibond 1567-A/B40
> Nom. Serv. Temp. 350degF if use the 150degF cure.
> 100:73 two-part semi-paste thixotropic, working time 20min, (thixotropic
> means it doesn't run or sag on you...perfect...just what you want)
> Cure schedule: 5days Room temp OR 1HR at 150degF
> Packaging: 50mL "Accumix cartridges", sorta like a double-barrel
> syringe.
> Price: $12.54 ea. cartridge  (note: 50mL probably enough to do several
> heads worth).
> BTW, this stuff is made primarily for Boeing.
> 
> Ciba Adhesive: 800-367-8793
> Last I bought from them, they had a minimum of $100, but they can also
> give you a list of distributors; but beware, the distributors may want a
> minimum of 10 cartridges, anyways. Hey, if you can't get just one, lemme
> know and we'll do a group buy of ten. No problemo, I can do that meself
> if enough (10) folks are interested.
> 
> Garfield

Garfield,
if you are doing a group buy I would be interested in 1 cartridge.

Cheers,
Simon

-- 
------------------------
Simon Bosworth	
simonb at primenet.com