Motronic : problem with idle

Todd Knighton knighton at net-quest.com
Mon Feb 3 19:26:31 GMT 1997


Terzidis Anastasios wrote:
> 
> Hello,
> Any advice or ideas about the problem I'm experiencing will be quit helpfull.
> 
> 1. Idle is very rough.
> 2. Lost torgue at low RPM (up to 3000 rpm).
> 3. Hesitation when accelerating from idle.
> 4. After gear shift engine first hesitate and then runs smooth.
> 
> Above 3500 rpm everything works fine.
> Emissions check shows engine runs lean (=1.02).
> Fuel pressure seams OK. Somewhere between 2.6 - 2.7 Bars.
> The car is a European PEUGEOT 106 XSi with motronic MP3.1
> 
> Thank you in advance.
> 
> TaSOS Terzidis
> teran at egnatia.ee.auth.gr
> teran at nestoras.ee.auth.gr


	Check your flywheel pickups for gap and resistance.  I think they're
around 1k ohms.  If they're too far off that they're junk.

Todd Knighton
Protomotive Engineering



More information about the Diy_efi mailing list