Injector Impedence Q

[Todd King]

  From: DemonTSi at aol.com
  <<<
  Date: Wed, 12 Feb 1997 20:35:53 -0500 (EST)
  Subject: Injector Impedence Q
  Basically, I was wondering if it's possible to run four injectors in
  series-parallel from a single injector driver. You will have to use four
  ...
  Any help with this would be great...!
  >>>
  
  Well- not really. If you connect 2 parallel legs, each leg with 2 series 
  injectors you'll have a total impedance similar to a single injector. But the 
  voltage across each injector will only be half of the total supply voltage, ie 
  you'll be running them at only 6 volts each, which is to say that the current 
  available to each one will be only about half what they were designed to 
  operate with; not good...
  
  Todd  Todd_King at ccm.co.intel.com