Mike's TPI question
John Hess
JohnH at ixc-comm.net
Fri Jan 10 15:53:59 GMT 1997
You DO NOT want an '85 TPI...PERIOD! The best bet is the early '86
Corvette, Plug the enrichment injector hole, plug the left fuel rail
connector to the enrichment injector, and install an '89 chip.
If you install the '89 system, the only changes required are to notch
the two center manifold to head bolt holes to accomodate the different
bolt angle that the aluminum head has versus the iron head (of course,
you might consider late model aluminum Corvette heads if you have the
coin). The '89 chip is simply a better tune in addition to getting
rid of the cold start injector.
----------
From: Daniel Burk[SMTP:ws6transam at voyager.net]
Sent: Thursday, January 09, 1997 10:12 PM
To: diy_efi at coulomb.eng.ohio-state.edu
Subject: Re: Mike's TPI question
Mike: You want a TPI from a '85 or '86 Z28 Camaro, corvette, or trans
am.
Those are the only cars that came with TPI, and pre-'87 will not
require you to modify the intake manifold.
More information about the Diy_efi
mailing list