O2 sensor mounting

[Doug Robson]

agreed fred i welded same to mine. I dont think 8 to 10 mm of protusion into
the pipe is as bad as getting the mixture wrong in the first place and not
knowing it.
also o2 sensors ( especially wideband in leaded fuel only last 50 hours so
you would take it out after dyno and use flush plug



At 08:41 PM 6/4/97 -0500, you wrote:
>What's a 'non fouler"?
>
>I just picked up an 18mm nut from the hardware store today for my new
>downpipe. Can't get much simpler than that.
>
>Fred
>
>At 06:10 PM 6/4/97 -0500, you wrote:
>
>> The simplest method is to buy a "non-fouler" from the local parts store
>>for $1.50 or so, drill out the bottom, and weld it in.  Much cheaper
>>than the special bungs.
>> 
>>
>>
>
>
>