FW: REJECTED: FW: REJECTED: FW: Re[2]: Hydrualic pressure to HP formula

Harper, Kevin kharper3 at skw1.lmsw.lmco.com
Mon Jun 16 20:46:23 GMT 1997


>
>----------
>From: 	MAILER-DAEMON at MV8.ceo
>Sent: 	Monday, June 16, 1997 8:49:48 AM
>To: 	Harper, Kevin
>Subject: 	REJECTED: FW: REJECTED: FW: Re[2]: Hydrualic pressure to HP formula
>          
>Auto forwarded by a Rule
>
   ----- Mail rejected by CEO. -----
(CEO_POA) Recipient's inbox is full.   Mail not sent to:oecar1 at mv8.ceo

   ----- Unsent message follows -----
From: kharper3 at skw1.lmsw.lmco.com
To:  diy_efi at coulomb.eng.ohio-state.edu
Subject: FW: REJECTED: FW: Re[2]: Hydrualic pressure to HP formula
    
X-Ceo_Options: Document

<Original text message attached as document>
                                   

CEO document contents:  

>
>----------
>From: 	MAILER-DAEMON at MV8.ceo
>Sent: 	Monday, June 16, 1997 7:11:54 AM
>To: 	Harper, Kevin
>Subject: 	REJECTED: FW: Re[2]: Hydrualic pressure to HP formula
>         
>Auto forwarded by a Rule
>
   ----- Mail rejected by CEO. -----
(CEO_POA) Recipient's inbox is full.   Mail not sent to:oecar1 at mv8.ceo

   ----- Unsent message follows -----
From: kharper3 at skw1.lmsw.lmco.com
To:  diy_efi at coulomb.eng.ohio-state.edu
Subject: FW: Re[2]: Hydrualic pressure to HP formula
   


>
>----------
>From: 	Terry Sare
>Sent: 	Monday, June 16, 1997 7:10:00 AM
>To: 	diy_efi at coulomb.eng.ohio-state.edu;
>owner-diy_efi-outgoing at coulomb.eng.ohio-state.edu
>Subject: 	Re[2]: Hydrualic pressure to HP formula
>Auto forwarded by a Rule
>
     Company called "Surplus Center" had a complete small axle assembly 
     with two motors and a pump built into it. They only wanted $700 for
     it.:-( Would mount up neatly to go kart. They also had surplus 
     hydraulic motors, pumps, etc.
     
     
     Terry 


______________________________ Reply Separator
_________________________________
Subject: Re: Hydrualic pressure to HP formula
Author:  owner-diy_efi-outgoing at coulomb.eng.ohio-state.edu at dell_unix
Date:    6/16/97 7:04 AM


I am figuring out the parts to make a fluid drive for a go-cart.  Have 
a couple of ideas for transmissions and want to try them out.
     
Dan L
     
     
> >What's formula for converting hydraulic pressure into horspower?  For 
> >instance, at 24 Gallons/Min @ 2300 PSI, what's the equivalent
> >horsepower?
>
> 32.205 HP
>
> HP = PSI X GPM / 1714
>
> Err, whatcha makin?
>
> Happy motoring,
>
>  Steve Delanty (sdelanty at sonoma.net) 
>
>   1971 F100, FE390, T-18 4-speed shortbox.






More information about the Diy_efi mailing list