Fuel injector cleaner
Michael T. Kasimirsky
mtk at tmc.astm.cmri.cmu.edu
Fri Jun 20 13:59:45 GMT 1997
Well I can't speak directly about cleaning fuel injectors, but I've used
Chevron's Techron in my GSX-R750 streetbike to remove some pretty heavy
intake valve deposits. The valves had crap deposited on them to about
1/2 the diameter of the tulip. I pulled the carbs to inspect the valves
directly, in case you're wondering. I used one bottle of Techron in a
tankful (about 5 gallons) of super unleaded, and ran two tanks of fuel
this way. I pulled the carbs again and the deposits were history. FYI,
other products on the market I tried didn't do diddly. Also, the gas was
the same brands I normally use, so I don't think it was the fuel.
The stuff isn't that expensive so it can't hurt to try it.
Michael T. Kasimirsky ----> mtk at tmc.astm.cmri.cmu.edu
Days: Staff Engineer or mk4u at andrew.cmu.edu
ASTM Test Monitoring Center Phi Gamma Delta,
Nights: 1992 Suzuki GSX-R750 Pilot NRA Life Member, AMA Member
1990 Yamaha FZR400 Superbike Racer DoD #1848
1991 Suzuki GSF400 Bandit Mechanic WERA Provisional Novice #753
More information about the Diy_efi
mailing list