Crank sensor signal mod

[eric schumacher]

Hi Dick
If you need pulses from a 12 tooth wheel and want to work with a 60 tooth
wheel just divide (count down) by five.  Usually you are not so lucky and it
is an odd fraction.  Then you have multiply by the numerator and divide the
result by the denominator. 

At 01:04 PM 6/24/97 +0000, you wrote:
>	I was wondering if anyone had ever modified the output signal of a
>crank sensor to make it work with an ecm that was expecting a different 
>sensor/wheel combination?