Denso EFI potting=ack!

[George M. Dailey]

MEK is laquar paint thinner.  I was coating a fuel tank that I made and
noticed that the "Tank Tech" coating was too thick to coat the tank. It just
rolled around like a blob of hot gum. When all else failed, I read the can
and it said to thin it using MEK. Worked just fine.
GMD

At 02:09 PM 3/4/97 +0200, you wrote:

>MEK Sounds like something as agressive as the methelene chloride I mentioned.
>Acetone is almost uselessly slow unless the epoxy has not quiet set, then it
>works a treat.
>
>> Good luck, and wear gloves!
>
>Yeah.  What type of glove is good for MEK ?
>
>Cheers
>-- 
>Kalle Pihlajasaari   kalle at ip.co.za   http://www.ip.co.za/ip
>Interface Products   P O Box 15775, DOORNFONTEIN, 2028, South Africa
>+ 27 (11) 402-7750   Fax: 402-7751    http://www.ip.co.za/people/kalle
>
>DonTronics, Silicon Studio and Wirz Electronics uP Product Dealer
>
>