who does eprom chip programming?

Mark Taschek mtaschek at spdhw.dsccc.com
Mon Mar 17 11:38:07 GMT 1997


> 
> Howdy,
> 	I have the new 3.4L engine (oversized, upgraded, pasturized, homogenized,
> chicken-chokin', mother-... well you get the picture... replacement for
> 2.8L).  I'm installing the TBI (model 220) EFI from an '86 S-10.  The
> computer is setup for the displacement of the 2.8L it feed, but now, with
> the 3.4L I would like to adjust it to compensate for the larger engine.
> I've seen the performance chips in the J.C. Whitney catalog for the 2.8L.
> This would probably help, but not be the best.
> 	Does anyone have a program to determine the information needed to burn a
> new eprom for this situation?  I have a friend who can burn the eprom, so
> if someone just has the software to make the file used to do this, that
> would be fine.
> 	Any help would be appreciated.  Comments on trying the mentioned
> performance chip would also be welcomed.
> 
> Thanks, Steve
>/////////////////////////
 Well Steve if you buy the chip from Whitney then have your friend 
 dump the data out with his prom reader and then dump your data out of your
 stock prom and compare the two. You could probbly see witch tables
 they are modifing inside the prom...
  




More information about the Diy_efi mailing list