Holley Red fuel pump

Frederic Breitwieser frederic.breitwieser at mcione.com
Tue May 6 15:24:50 GMT 1997


It might also help if the fuel line clamps are rubber coated, to ease the 
vibration against the frame, and placed more often so there are no "bowed" 
sections free to vibrate.  Also considering frequency and harmonics 
associated with vibrations, placing the fuel line clamps at oddball 
intervals, might prevent any wave vibrations from going "down the line". 
 Place the first two apart by 2', the second 2 by 1.5', etc.

Fred

On Tuesday, May 06, 1997 10:18 AM, Bruno! 
[SMTP:b.marzano at student.canberra.edu.au] wrote:
> of putting a low-pressure fuel filter on the output side to act as a
> damper on the fuel pressure. If there is a better solution (hopefully
> using the pump still - i don't want to get rid of it so soon) or 
something




More information about the Diy_efi mailing list