Bad Cylinder... Need advice!!!
Kurt Bilinski
kurt.bilinski at GAT.COM
Mon May 12 14:40:23 GMT 1997
At 01:36 AM 5/10/97 -0400, you wrote:
> Cylinder #1 does not ignite (Oxy sensor, exhaust tube cold)
> Has spark (checked externally, holding it to side of engine
> Spark is shared with Cyl #4, operating OK.
> Has fuel (will come out wet if you run the engine for a while)
>
> 1. Sticky valve
> 2. Scratched cylinder (we just put an air filter on today!)
> 3. Blown gasket (though I don't see oil in exhaust...)
>
See if you have weak ignition. The plug sparks, but perhaps not under the
pressure of compression...
Do a compression test too.
Good Luck,
Kurt Bilinski
More information about the Diy_efi
mailing list