Identify Injectors

[Robert Gallant]

> "E4...." would be an '84 Ford p/n.

Thanks for the info.

After you mentioned Ford, I remembered that I had a list of Ford injectors that 
was published by Dan Malek on the old Hotrod list (when run by John De Armond). 
Sure enough, the injectors were on the list:

Flow       PSI   Resist  Mfg.  Part     Color  Application
6.60 (52)  32     2.25  Bosch  E4ZE-CA  Gray   1984-5 5.0L HO CFI

The flow rate is gm/sec and lb/hr in parenthesis.

Later

Rob
gallant at oasys.dt.navy.mil