SDS EM-1D EFI system

[MFetsko at aol.com]

Just read an interesting article from Turbo & hi-tech performance on an
affordable engine management system from Simple Digital Systems.
The SDS EM-1D EFI system has a base price of  662$ and comes
standard with
 ______________________________________________________________________

aluminum ECU box
hand held programer
mixture control module (%)
injector driver (4)
air temt sensor
water temp sensor
map sensor (3bar)
injector harness
instruction manual
main wiring harness
hall sensors/with magnets (crank trigger)
coil pack (4)

OPTIONS
3-wire O2 sensor
knock senor
A/F meter
injectors
fuel pumps

runs in open loop until coolant temp reaches 35deg. celcius and at WOT
any other time it is in closed loop. Also has a rev limit and boost limit.
Did not see anything on the hand held programing unit display or how many
points within a rpm range or however they program it when it is in closed
loop.
It might just keep a A/F ratio. 

If anyone has used this system I would like to know the results.

Racetech Engineering
(403) 274-0154