toyota injectors

[David Chambers]

swagaero wrote:
> 
> David Chambers wrote:
> >
> > Hi, I am building a computer to run a friends 20 valve 4AGE toyota motor
> > in a race car. The question i have is does any one know the driving
> > requirements for the injectors on this motor. All i know at this stage
> > is that they measure 34 ohms coil resistance. I am hoping that these are
> > high impedance injectors and can be all wired in parallel and fired by
> > one FET to ground. Also does any one know anything about how the
> > variable valve timing works on this motor.
> > Thanks
> > David Chambers
> 
> Yes they will fire in parallel but it better be a big heat sunk fet.
> 
> Steve
> --
> 
>                    ----|------||------|----
>                      --|------[]------|--
>                             0/  \0
> 
> www.flash.net/~swagaero
I don't think the fet will get that hot. My calculations show.
	14 volts/34 ohms * 4 injectors = 1.65 amps.
	1.65 amps ^ 2  * FET Rds of 0.077 ohms = 0.21 watts
	junction to ambient temp rise is 80 deg C/ watt
	therefore Trise = 16.8 deg C or total T of max 61.8 degC at 45C
ambient.
Am i missing something here?
David