Fuel Pressure.....what to use ?

[swagaero]

Simon Quested wrote:
> 
> Hi All
> 
> With the fuel pressuer debate going on I thought i'd throw this in...
> 
> Can someone tell me if I'm on the right track.
> I have a Ford "pinto" 2 liter to go in my Capri. I'm using port
> injection.
> 
> Atomosphere (1 bar) = 14.7 psi
> turbo boost = 15 psi
> 
> so the fuel pressure is going to need to be at least 14.7 more than
> max in the inlet manifold this will give me a total fuel pressure of
> 44.4 psi  (3 bar approx)
> 
> I'm going to be using a regulator with an inlet manifold pressure
> line so that will increase the fuel pressure under boost.
> 
> What shoud I set the idle fuel preesure at ?
> I was thinking 14.7 psi
> 
> Cheers
> 
> Simon
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>   Simon Quested (E-mail questeds at lincoln.ac.nz)
>   Computer Technician, Silicon Graphics & Windows NT Support
>   Centre for Computing and Biometrics
>   LINCOLN UNIVERSITY OF NEW ZEALAND
>   Phone (64)(03) 3252811 Ext. 8087
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> http://www.lincoln.ac.nz/ccb/techs/simon/default.htm
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> When the chips are down, the cow is empty.
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
WAY TO LOW RUN IT AT 32 TO 36 LBS
-- 

                   ----|------||------|----
                     --|------[]------|--
                            0/  \0



www.flash.net/~swagaero