Injector pintle end caps

[Michael Skolones]

--IMA.Boundary.286180478
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Content-Description: cc:Mail note part

     I just bought some injector rebuild kits ($3.50 apiece) for my '84 
     Volvo LH-Jet; the kit included some O-rings, pintle caps and O-ring 
     supports.  I got them at RPR Volvo parts, in Albany CA (they're on the 
     web).  The kit instructions said not to replace the pintle caps if the 
     originals on the FI were yellow (which mine were-I guess it's an older 
     version of the injector).
     
     Mike Skolones


______________________________ Reply Separator _________________________________
Subject: Injector pintle end caps
Author:  diy_efi at coulomb.eng.ohio-state.edu at Internet
Date:    9/12/97 8:23 AM


Does anyone know where to buy the plastic caps for the end of bosch type 
injectors?  These
are out of a Ford but should not matter.  Most of the ones I have seen are about
the same. 
Except MSD injectors which do not have plastic caps.  I already talked to MSD, 
Kinsler and
Cartech and Ford Parts.  I also tried the obvious parts stores.  Tried the junk 
yard too but old
ones all seem to crack as you try to get them off.  No luck.
     
Any help will be appreciated.
     
Thanks
James Thorne
jthorn at mustangeng.com
     
--IMA.Boundary.286180478
Content-Type: text/plain; charset=US-ASCII; name="RFC822 message headers"
Content-Transfer-Encoding: 7bit
Content-Description: cc:Mail note part
Content-Disposition: inline; filename="RFC822 message headers"

Received: from coulomb.eng.ohio-state.edu (128.146.90.150) by
mailserver.mail1.com with SMTP
  (IMA Internet Exchange 2.1 Enterprise) id 00098BDA; Fri, 12 Sep 97 07:42:00
-0700
Received: by coulomb.eng.ohio-state.edu (940816.SGI.8.6.9/940406.SGI)
	for diy_efi-outgoing id NAA18900; Fri, 12 Sep 1997 13:24:05 GMT
Received: from mail.mustangeng.com by coulomb.eng.ohio-state.edu via SMTP
(940816.SGI.8.6.9/940406.SGI)
	for <diy_efi at coulomb.eng.ohio-state.edu> id JAA18891; Fri, 12 Sep 1997 09:24:02
-0400
Received: from mustangeng.com. (mustangeng.com. [207.90.218.227]) by
mail.mustangeng.com (NTMail 3.02.13) with ESMTP id ja114409 for
<diy_efi at coulomb.eng.ohio-state.edu>; Fri, 12 Sep 1997 08:24:59 -0500
Received: from MEI-Message_Server by mustangeng.com
	with Novell_GroupWise; Fri, 12 Sep 1997 09:23:37 -0500
Message-Id: <s4190a19.016 at mustangeng.com>
X-Mailer: Novell GroupWise 4.1
Date: Fri, 12 Sep 1997 08:23:31 -0500
From: James Thorne <jthorn at mustangeng.com>
To: diy_efi at coulomb.eng.ohio-state.edu
Subject: Injector pintle end caps
Mime-Version: 1.0
Content-Type: text/plain
Content-Disposition: inline
Sender: owner-diy_efi at coulomb.eng.ohio-state.edu
Precedence: bulk
Reply-To: diy_efi at coulomb.eng.ohio-state.edu

--IMA.Boundary.286180478--