HEI timing jump

Sandy sganz at wgn.net
Sat Apr 4 06:02:13 GMT 1998


>Would it be possible to build a signal amplifier for hall
>effect switches that will increase module trigger voltage as
>rpm increases?  Seems like this is what you need.
>
>Shannen
> 

Probabally could be done with some simple circuits, or even a PIC, and you
could just dial in your advance curve. Would require some thought to make it
all work. And yes, the standard 4 prong HEI module does not advance the timing
when fed digitally. It is the increase in voltage at higher RPM that cause the
trigger point to be hit sooner. Halleffects don't have that problem.

Sandy 



More information about the Diy_efi mailing list