EEC-IV

[Orin Eman]

> Sorta neat, I don't think its terribly useful.  SInce the different layers
> (however many they are) cross each ohter between layers, its really hard to
> tell what goes where.  And while an ohm meter is suitable for tracing
> circuit boards, having parts on the board realy makes it nearly impossible
> to really know what goes where.  All you need is a diode and the ohm meter
> going the right way, and it appears to be a foil trace.

My DMM has a diode test position... beeps for continuity, otherwise
shows the forward voltage for a diode and out of range for open circuit
or reverse biased diode.  Might solve the diode problem ;-)

Orin.