165 question

[Vance Rose]

At 10:30 PM 8/1/98 -0400, you wrote:
>
>-----Original Message-----
>From: Vance Rose <javer96 at snowcrest.net>
>To: diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
>Date: Saturday, August 01, 1998 9:23 PM
>Subject: 165 question
>
>
>>Hi All 
>>
>> In 165 ecm noticed that there were two set of temps settings for cooling
>>fan.  Pin C1 controls cooling fan. Wondered if there was a second output
>>pin for fan control? 
>
>I show a D11 as Fan Press A/C.  No where do I see a second 
>reference to a 2nd cooling fan.   Let, me know if that works,please
>Cheers
>Bruce
>
>Wanted to have two fans in pu that came on at
>>different temps. Have some minor drivabilty problems in really hot weather
>>- hope to have ecm do controlling of fans instead of wiring to have come
>>with eng running.
>>
>>
>>TIA Vance
>>
>
>Hi Bruce


	Thanks for reply - D11 is for pressure switch that senses high pressure in
A/C. When pressure reaches 160 psi - coolant fan comes on no matter what
temp. Will wire up fan to come on manually. Just hoping.

Thanks Vance