Two cooling fans (was: 165 question)

[AL8001 at aol.com]

In a message someone wrote:

>>Wanted to have two fans in pu that came on at
>>>different temps. Have some minor drivabilty problems in really hot weather
>>>- hope to have ecm do controlling of fans instead of wiring to have come
>>>with eng running.
>>>

It dosn't have to that complicated (searching for a ecm output and table ).
Look in a auto parts catalog for a water temp switch used for a hot light.
Many have a small screw covered by paint or sealer. Most of the older Ford
sensors have a threaded stud with a flat on one side.

Clean off the paint, then turn the screw two turns clockwise. Most engines
have extra pluged holes in the intake or cylinder heads. Connect the switch to
the relay for the second fan.  Run the engine and adjust the screw to the temp
you desire.

Simple, easy and cheap.