808 Fault Codes

[Bruce Plecan]

-----Original Message-----
From: Matt Tomlins <mattpw at ozemail.com.au>
To: diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
Date: Monday, August 03, 1998 4:58 AM
Subject: 808 Fault Codes


Thanks
Bruce

>
>Bruce
>The fault code 22 you saw was TPS voltage too low.
>My manual says that this code is set if TPS voltage falls below 0.15V
>
>Here is a list of all 808 Fault codes.
>
>12    System Functioning OK
>13    Oxygen sensor Open Circuit
>14    CTS low ( <0.7V)
>15    CTS High (>4.65)
>21    TPS High (>2.5V and MAP <60kPa fot 2 secs)
>22    TPS Low (<0.15V)
>23    MAT High (>4.9V)
>24    VSS Error
>25    MAT Low (<0.3V)
>33    MAP High 
>34    MAP Low
>41    No Refrence Pulse
>42    EST Failure
>43    Knock Sensor open or shorted
>44    Oxygen sensor low (<0.25V, >20Sec)
>45    Oxygen sensor high (>0.45V, >20Sec)
>51    MEMCAL Error
>55    A to D error (>5.5V)
>
>Hope that this helps
>Cheers
>Matt
>
>
>
>
>