FI system on a SC rotory
Greg Hermann
bearbvd at sni.net
Wed Aug 12 01:52:05 GMT 1998
There are several different "air doors" out there to fit a Holley square
bore flange. Give me a whistle off list if you need info. Like anything
else, some are pretty good, others are not so good.
Regards, Greg
>I am building up a supercharged 1.3L rotory. I am in need of throtle body
>for the car. I am looking for something that will bolt to a holley square
>flange arangement.
>
>My supercharger is set up to run in a draw thru application. However the
>rotory block is set up to allow direct injection into the chambers for 2
>injectors. Boost will be between 9 and 12 psi. I would like to run at
>least 4 injectors, maybe 6. I am looking at a wolf3d fuel/spark computer.
>But would be real open to cheaper/ or better ideas.
>
>
>thanks
>bob
More information about the Diy_efi
mailing list