MSD 6AL

[Bruce Plecan]

-----Original Message-----
From: Brian Dotson <whisp at iocc.com>
To: EFI332 <efi332 at efi332.eng.ohio-state.edu>;
diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
Date: Thursday, August 20, 1998 9:30 PM
Subject: MSD 6AL


>HI,
> I am currently working on a project where I
>need to get a rpm reference from my MSD 6 AL
>ignition. It uses a flywheel mounted wheel
>with 4 rare earth magnets embedded in the
>outer portion of the ring at 90 degrees
>apart. Does this ignition use the same type
>of pickup as the factory HEI ignition does?
>The reason I ask is that you can trigger the
>MSD 6 AL from a factory HEI or a crank
>trigger. That is why I need to find out how I
>can get a rpm pulse and how I should
>condition it for a micro controller. TIA
> Brian :}
>
>