Injector Sizing
Shannen Durphey
Shannen at mcn.net
Wed Aug 26 11:18:51 GMT 1998
Jason Weir wrote:
>
> I have a question about injector sizing differences between TBI and
> TPI, In TBI theoretically you have 1 injector fueling 4 cylinders, in a
> TPI there is one injector per cylinder, now here is the question,
> generally do TBI injectors have 4 times the flow capability or is the
> pulse width just increased by 4. Say if you were gonna run a TPI system
> off a TBI ECM (assuming the ECM could handle the load), I wonder if the
> pulse width would be close enough so the thing would run or will I be
> dividing everything by on the fuel table by 4? Or somewhere in between,
> some more food for thought, Jason
TBI injectors generally have a greater pulse width than tpi
setups. I would say a fuel map diet is in order.
Interested in trying to get a prom from Edelbrock for their
7747 PFI conversion?
Shannen
>
> --
> Jason Weir
> 88 Wrangler - 258 Chevy TBI
> Fayetteville, North Carolina
> http://home.att.net/~jweir/tbi/inject.htm --- TBI Installation Page
> http://home.att.net/~jweir/resume.htm --- My Resume
> mailto:jweir at worldnet.att.net
More information about the Diy_efi
mailing list