Motronic Programers

[WILMAN]

----------
> From: Bruce Plecan <nacelp at bright.net>
> To: diy_efi at efi332.eng.ohio-state.edu
> Subject: Re: Motronic Programers
> Date: Tuesday, December 22, 1998 9:22 AM
> 
> 
> -----Original Message-----
> From: WILMAN <wilman at hkabc.net>
> To: diy_efi at efi332.eng.ohio-state.edu <diy_efi at efi332.eng.ohio-state.edu>
> Date: Monday, December 21, 1998 7:56 PM
> Subject: Re: Motronic Programers
> 
> I have heard of one gentleman that was utterly unimpressed with
> what he got from them.  I'd be real sure to get in a conversation, or
> better yet in writting exactly what it will allow you to do, and NOT do.
>   I've seen one that was borderline criminal for being an editor.
> Better yet, get a demo..
> Bruce
> 

Are you referring to Racelogic's emulator? What seems to be the problem?
I have got one. I do not feel particularly unhappy about it. Am I missing
something
that I should have or know?

Demo version is available from the web site.
http://www.racelogic.co.uk








> >> From: R Mehta <rmehta01 at yahoo.com>
> >> Subject: Re: Motronic Programers
>  
> >> Yep, I too have been looking into programming the motronic system for
> >> my 1999 Audi A4 Turbo.. I've found a company called Race Logik in the
> >> UK that sells a system for around 1400 pounds (I am not sure that the
> >> exchange rate is) but their software supports most all Motronic
> >> systems I think.. 
> >I thought Racelogic did emulators only and not specific Motronic
> >programmer.
> > ---Dan Llewellyn2 <DanLlwln at ix.netcom.com> wrote:
> >> > Does anybody know who has or sells Motronic re-programming
> >> > software for a Porsche 3.2 1987 Carrera engine?  I would like to
> >> > change injector sizes, switch to mass air flow metering and alter
> >> > spark timing.
> >> > 
> >> > I am aware of Protomotive which sells a rather expensive programmer.
> >> > I saw a slick demo program a year or two ago from Jim at Bonneville
> >> > Motor
> >> > Werks, but I don't think he is around anymore.
> >> > Any other programmers?  I would rather do my own programming than go
> >> to
> >> > one of the speed shops that does programming themselves.
> >> > Thanks,
> >> > Dan
> 
>