Motronic Programers

[Bruce Plecan]

-----Original Message-----
From: WILMAN <wilman at hkabc.net>
Subject: Re: Motronic Programers
>
>> From: Bruce Plecan <nacelp at bright.net>
> Subject: Re: Motronic Programers
>> -----Original Message-----
>> From: WILMAN <wilman at hkabc.net>
>> Subject: Re: Motronic Programers
>> I have heard of one gentleman that was utterly unimpressed with
>> what he got from them.  I'd be real sure to get in a conversation, or
>> better yet in writting exactly what it will allow you to do, and NOT do.
>>   I've seen one that was borderline criminal for being an editor.
>> Better yet, get a demo..
>> Bruce
>Are you referring to Racelogic's emulator? What seems to be the problem?
>I have got one. I do not feel particularly unhappy about it. Am I missing
>something
>that I should have or know?

As I recall was he was working on a ford, and unable to find much in the way
of tables, from what he discribed was a graphic editor, and
difficult to use, if you not having problems finding the tables then,
It's working for you.
Bruce
>
>Demo version is available from the web site.
>http://www.racelogic.co.uk
>
>
>
>
>
>
>
>
>> >> From: R Mehta <rmehta01 at yahoo.com>
>> >> Subject: Re: Motronic Programers
>>
>> >> Yep, I too have been looking into programming the motronic system for
>> >> my 1999 Audi A4 Turbo.. I've found a company called Race Logik in the
>> >> UK that sells a system for around 1400 pounds (I am not sure that the
>> >> exchange rate is) but their software supports most all Motronic
>> >> systems I think..
>> >I thought Racelogic did emulators only and not specific Motronic
>> >programmer.
>> > ---Dan Llewellyn2 <DanLlwln at ix.netcom.com> wrote:
>> >> > Does anybody know who has or sells Motronic re-programming
>> >> > software for a Porsche 3.2 1987 Carrera engine?  I would like to
>> >> > change injector sizes, switch to mass air flow metering and alter
>> >> > spark timing.
>> >> >
>> >> > I am aware of Protomotive which sells a rather expensive programmer.
>> >> > I saw a slick demo program a year or two ago from Jim at Bonneville
>> >> > Motor
>> >> > Werks, but I don't think he is around anymore.
>> >> > Any other programmers?  I would rather do my own programming than go
>> >> to
>> >> > one of the speed shops that does programming themselves.
>> >> > Thanks,
>> >> > Dan
>>
>>
>